April 2013 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Apr 1 10:19:46 CEST 2013
Ending: Tue Apr 30 16:42:35 CEST 2013
Messages: 133

• [strongSwan] How to limit the size of the filelog   梅香
• [strongSwan] why strongswan 4.6.4 resstart automatically soomtimes?   nanjian5
  • [strongSwan] why strongswan 4.6.4 resstart automatically soomtimes?   Martin Willi
  • [strongSwan] why strongswan 4.6.4 resstart automatically soomtimes?   nanjian5
• [strongSwan] Older Windows Clients   Eric Holtz
  • [strongSwan] Older Windows Clients   Martin Willi
• [strongSwan] How can I connection strongswan server with vpnc client?   Chopin Ngo
  • [strongSwan] How can I connection strongswan server with vpnc client?   Azfar Hashmi
  • [strongSwan] How can I connection strongswan server with vpnc client?   Chopin Ngo
• [strongSwan] ECDSA failures with Strongswan 5.0.2 and openssl 1.0.1e-fips   Scot Hutchinson
  • [strongSwan] ECDSA failures with Strongswan 5.0.2 and openssl 1.0.1e-fips   Tobias Brunner
    • [strongSwan] ECDSA failures with Strongswan 5.0.2 and openssl 1.0.1e-fips   Scot Hutchinson
• [strongSwan] overlapping redundant subnets   Patrick Hemmer
  • [strongSwan] overlapping redundant subnets   Martin Willi
    • [strongSwan] overlapping redundant subnets   Patrick Hemmer
      • [strongSwan] overlapping redundant subnets   Bharath Kumar
• [strongSwan] Strongswan needs periodic restart to re-enable traffic between sites   Andreas Ntaflos
  • [strongSwan] Strongswan needs periodic restart to re-enable traffic between sites   Andreas Steffen
    • [strongSwan] Strongswan needs periodic restart to re-enable traffic between sites   Andreas Ntaflos
• [strongSwan] our client ID returned doesn't match my proposal   Pavel Kopchyk
• [strongSwan] updown script + stats   kgardenia42
  • [strongSwan] updown script + stats   Martin Willi
    • [strongSwan] updown script + stats   kgardenia42
• [strongSwan] keep tunnel alive   Arun G Nair
  • [strongSwan] keep tunnel alive   Arun G Nair
  • [strongSwan] keep tunnel alive   Justin Cinkelj
    • [strongSwan] keep tunnel alive   Arun G Nair
      • [strongSwan] keep tunnel alive   Andreas Steffen
      • [strongSwan] keep tunnel alive   Arun G Nair
      • [strongSwan] keep tunnel alive   Andreas Steffen
• [strongSwan] Unable to send traffic inside once connected   Corey Garst
• [strongSwan] Overlapping rightsubnets - Is it possible to determine on which tunnel packet arrived?   Bharath Kumar
  • [strongSwan] Overlapping rightsubnets - Is it possible to determine on which tunnel packet arrived?   Bharath Kumar
• [strongSwan] CRL caching   yordanos beyene
  • [strongSwan] CRL caching   Andreas Steffen
    • [strongSwan] CRL caching   yordanos beyene
      • [strongSwan] CRL caching   Andreas Steffen
      • [strongSwan] CRL caching   yordanos beyene
• [strongSwan] How can I allow only specific IP use PSK auth?   Chopin Ngo
  • [strongSwan] How can I allow only specific IP use PSK auth?   Andreas Steffen
    • [strongSwan] How can I allow only specific IP use PSK auth?   Chopin Ngo
• [strongSwan] ANNOUNCE: strongswan-5.0.3 released   Andreas Steffen
• [strongSwan] Weird NAT IP as username.   Kris
  • [strongSwan] Weird NAT IP as username.   Andreas Steffen
    • [strongSwan] Weird NAT IP as username.   Andreas Steffen
      • [strongSwan] Weird NAT IP as username.   Kris
• [strongSwan] Log every few seconds appeared "not enough input to parse rule 0 IKE_SPI"   Chopin Ngo
  • [strongSwan] Log every few seconds appeared "not enough input to parse rule 0 IKE_SPI"   Chopin Ngo
• [strongSwan] leftsource ip Config failing in a particular scenario   Mohit Sharma
• [strongSwan] a problem about size of the filelog   xiaomei xie
• [strongSwan] A problem of using “ipsec start --attach-gdb” command   xiaomei xie
• [strongSwan] wiki article iOS   Michael Monnerie
• [strongSwan] iOS Device Not Connecting on LTE after using WiFi   Joshua Gross
• [strongSwan] Problem with acquire job and established SA??   A. Valentin
• [strongSwan] No outbound ipsec policy on Android   Noel Kuntze
  • [strongSwan] No outbound ipsec policy on Android   Tobias Brunner
• [strongSwan] no virtual IP found for %any requested   carachi diego
  • [strongSwan] no virtual IP found for %any requested   Andreas Steffen
    • [strongSwan] no virtual IP found for %any requested   carachi diego
• [strongSwan] generating INFORMATIONAL_V1 request   carachi diego
• [strongSwan] PKI Generator   carachi diego
• [strongSwan] Strongswan to Cisco router configuration help   Brian secmang
  • [strongSwan] Strongswan to Cisco router configuration help   Bharath Kumar
• [strongSwan] Finally get my win 7 connected to strongSwan, but there's no Internet   Day Dreamer
• [strongSwan] unable to set IPSEC_POLICY on socket   Matt Lee
  • [strongSwan] unable to set IPSEC_POLICY on socket   Martin Willi
• [strongSwan] no ping the internal network   carachi diego
  • [strongSwan] no ping the internal network   Noel Kuntze
    • [strongSwan] no ping the internal network   carachi diego
      • [strongSwan] {Disarmed} RE: {Disarmed} Re: no ping the internal network   Ian McDonald
• [strongSwan] Working config for integrated Android IPSec Client   Noel Kuntze
  • [strongSwan] Working config for integrated Android IPSec Client   Bharath Kumar
• [strongSwan] Windows 7 IKEv2 VPN virtual IP issue   Far.Runner
  • [strongSwan] Windows 7 IKEv2 VPN virtual IP issue   Far.Runner
• [strongSwan] How to create the certificates   carachi diego
  • [strongSwan] How to create the certificates   Bharath Kumar
• [strongSwan] Test Case: net2net-same-nets -- routing table on Gateway Sun   Bharath Kumar
• [strongSwan] how to use the ipsec unroute <conn_name> command   Mao, Zhiheng
• [strongSwan] Attempted PSK IKEv2 VPN w/BB10 - fails negotiation   Karl Denninger
  • [strongSwan] Attempted PSK IKEv2 VPN w/BB10 - fails negotiation   Martin Willi
    • [strongSwan] Attempted PSK IKEv2 VPN w/BB10 - fails negotiation   Karl Denninger
      • [strongSwan] Attempted PSK IKEv2 VPN w/BB10 - negotiation works, now routing problems   Karl Denninger
• [strongSwan] Help (dh Algorithms) ecp_192, ecp_224, ecp_256, ecp_384 and ecp_521   ahmed yassine
  • [strongSwan] Help (dh Algorithms) ecp_192, ecp_224, ecp_256, ecp_384 and ecp_521   Andreas Steffen
• [strongSwan] SPD vs proxy-id   Karol Cieśla
• [strongSwan] IkeV2 + Nat = Huh?   Karl Denninger
• [strongSwan] Add a key usage field to a key using pki-tool?   Jonathan Jergens
  • [strongSwan] Add a key usage field to a key using pki-tool?   Jonathan Jergens
• [strongSwan] libipsec vs kernel implementation   Noel Kuntze
  • [strongSwan] libipsec vs kernel implementation   Andreas Steffen
• [strongSwan] How to select Algorithms in the client side?   신충수
• [strongSwan] Android config file location   John Charles
  • [strongSwan] Android config file location   Andreas Steffen
• [strongSwan] VPN Gateway behind firewall...   Flemming Hougaard
  • [strongSwan] VPN Gateway behind firewall...   Martin Willi
    • [strongSwan] VPN Gateway behind firewall...   Pawel Grzesik
• [strongSwan] INITIAL_CONTACT notification   Patil, Shashidhar 1. (NSN - IN/Bangalore)
  • [strongSwan] INITIAL_CONTACT notification   Martin Willi
• [strongSwan] Charon stops processing after receiving “no proposal chosen" notification   Joern Mewes
  • [strongSwan] Charon stops processing after receiving “no proposal chosen" notification   Martin Willi
• [strongSwan] different output of 'ipsec statusall' command in version 4.5.3 and 5.0.2 for tunnels configured with IKEv1   अनुज
  • [strongSwan] different output of 'ipsec statusall' command in version 4.5.3 and 5.0.2 for tunnels configured with IKEv1   Martin Willi
    • [strongSwan] different output of 'ipsec statusall' command in version 4.5.3 and 5.0.2 for tunnels configured with IKEv1   अनुज
      • [strongSwan] different output of 'ipsec statusall' command in version 4.5.3 and 5.0.2 for tunnels configured with IKEv1   अनुज
• [strongSwan] IKE_SA_INIT failed with StrongSwan Site to Site VPN between different amazon VPCs   Kelly
• [strongSwan] Working configuration to connect to an ASA   Noel Kuntze
  • [strongSwan] Working configuration to connect to an ASA   Noel Kuntze
    • [strongSwan] Working configuration to connect to an ASA   Noel Kuntze
• [strongSwan] Strongswan with freeradius on Debian server   Sabrina Louison-francois
  • [strongSwan] Strongswan with freeradius on Debian server   Sabrina Louison-francois
  • [strongSwan] Strongswan with freeradius on Debian server   Sabrina Louison-francois
  • [strongSwan] Strongswan with freeradius on Debian server   Andreas Steffen
    • [strongSwan] Strongswan with freeradius on Debian server   Sabrina Louison-francois
      • [strongSwan] Strongswan with freeradius on Debian server   Andreas Steffen
      • [strongSwan] Strongswan with freeradius on Debian server   Sabrina Louison-francois
      • [strongSwan] Strongswan with freeradius on Debian server   Sabrina Louison-francois
      • [strongSwan] Strongswan with freeradius on Debian server   Andreas Steffen
      • [strongSwan] Strongswan with freeradius on Debian server   Sabrina Louison-francois
• [strongSwan] Tunnels established but still not able to ping sometimes   अनुज
• [strongSwan] IKEv1 and AESNI support?   Kris
  • [strongSwan] IKEv1 and AESNI support?   Andreas Steffen
• [strongSwan] CISCO UDP encapsulation   Noel Kuntze
  • [strongSwan] CISCO UDP encapsulation   Andreas Steffen
• [strongSwan] how to requests internal WINS server information for a linux ikev2 client   amysue.z at gmail.com
• [strongSwan] Working config for Android client   John Charles
• [strongSwan] PSK IKEv2 Client -> BlackBerry Z-10 [Gateway certificate w/PSK for client auth] fails   Karl Denninger
  • [strongSwan] PSK IKEv2 Client -> BlackBerry Z-10 [Gateway certificate w/PSK for client auth] fails   Karl Denninger
• [strongSwan] IKEv2/EAP-MSCHAP fails with 'traffic selectors inacceptable'   Albrecht Dreß
• [strongSwan] query for behaviour of DPD   Mukesh Yadav
• [strongSwan] Using existing CA for strongSwan; Way to specify which client certs are valid for VPN?   Igor Sverkos
  • [strongSwan] Using existing CA for strongSwan; Way to specify which client certs are valid for VPN?   Andreas Steffen
    • [strongSwan] Using existing CA for strongSwan; Way to specify which client certs are valid for VPN?   Igor Sverkos
• [strongSwan] ANNOUNCE: strongSwan-5.0.4 released / ECDSA signature vulnerability (CVE-2013-2944)   Tobias Brunner

Last message date: Tue Apr 30 16:42:35 CEST 2013
Archived on: Tue Mar 4 15:05:06 CET 2014

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...