April 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Apr 1 00:56:35 CEST 2012
Ending: Mon Apr 30 17:56:32 CEST 2012
Messages: 174

• [strongSwan] StrongSwan to Sonicwall TZ180W   Chris Arnold
  • [strongSwan] StrongSwan to Sonicwall TZ180W   Andreas Steffen
• [strongSwan] Site to Site with PSK Error   Andreas Steffen
  • [strongSwan] Site to Site with PSK Error   Chris Arnold
    • [strongSwan] Site to Site with PSK Error   Andreas Steffen
      • [strongSwan] Site to Site with PSK Error   Chris Arnold
      • [strongSwan] Site to Site with PSK Error   Chris Arnold
      • [strongSwan] Site to Site with PSK Error   Chris Arnold
• [strongSwan] Ikev2 for ipv6 with protocol icmp6   Indira Manthri
  • [strongSwan] Ikev2 for ipv6 with protocol icmp6   Eric_C_Johnson at Dell.com
    • [strongSwan] Ikev2 for ipv6 with protocol icmp6   Indira Manthri
• [strongSwan] nat_traversal_new_mapping: address change currently not supported [50.1.1.226:1797, 50.1.1.228:1797]   SaRaVanAn
  • [strongSwan] nat_traversal_new_mapping: address change currently not supported [50.1.1.226:1797, 50.1.1.228:1797]   Andreas Steffen
    • [strongSwan] nat_traversal_new_mapping: address change currently not supported [50.1.1.226:1797, 50.1.1.228:1797]   SaRaVanAn
• [strongSwan] FQDN based certificate authentication for ikev2   Reshma Begam
  • [strongSwan] FQDN based certificate authentication for ikev2   Andreas Steffen
    • [strongSwan] FQDN based certificate authentication for ikev2   Reshma Begam
      • [strongSwan] FQDN based certificate authentication for ikev2   Andreas Steffen
      • [strongSwan] FQDN based certificate authentication for ikev2   Reshma Begam
• [strongSwan] routed based vpn or CISCO VTI (Virtual Tunnel Interface)   Fabrice Barconnière
  • [strongSwan] routed based vpn or CISCO VTI (Virtual Tunnel Interface)   Andreas Steffen
• [strongSwan] Data \ Time based rekeying   Tobias Brunner
• [strongSwan] scepclient and cisco   Tobias Brunner
  • [strongSwan] scepclient and cisco   Germano Veit Michel
• [strongSwan] procedure on network interface changes to ensure least disruption to ipsec tunnels currently established   Tobias Brunner
• [strongSwan] Soft Lifetime set as "0" in SAD in data base   Reshma Begam
  • [strongSwan] Soft Lifetime set as "0" in SAD in data base   Andreas Steffen
    • [strongSwan] Soft Lifetime set as "0" in SAD in data base   Reshma Begam
      • [strongSwan] Soft Lifetime set as "0" in SAD in data base   Reshma Begam
      • [strongSwan] Soft Lifetime set as "0" in SAD in data base   Tobias Brunner
• [strongSwan] Missing "ikev2/nat-portswitch" and "ikev2/nat-rw-mixed" tests on www.strongswan.org   NGO MAEMBLE Ruth-Stephanie
  • [strongSwan] Missing "ikev2/nat-portswitch" and "ikev2/nat-rw-mixed" tests on www.strongswan.org   Andreas Steffen
• [strongSwan] Certificates no longer valid   NGO MAEMBLE Ruth-Stephanie
  • [strongSwan] Certificates no longer valid   Andreas Steffen
    • [strongSwan] Certificates no longer valid   NGO MAEMBLE Ruth-Stephanie
      • [strongSwan] Certificates no longer valid   Andreas Steffen
• [strongSwan] Why a certificate error when we are using PSK....   Chris Arnold
  • [strongSwan] Why a certificate error when we are using PSK....   Martin Willi
• [strongSwan] Question on IKEv2   Chris Arnold
  • [strongSwan] Question on IKEv2   Andreas Steffen
    • [strongSwan] Question on IKEv2   Chris Arnold
      • [strongSwan] Question on IKEv2   Chris Arnold
      • [strongSwan] Question on IKEv2   Chris Arnold
      • [strongSwan] Question on IKEv2   Andreas Steffen
      • [strongSwan] Question on IKEv2   Chris Arnold
      • [strongSwan] Question on IKEv2   Chris Arnold
      • [strongSwan] Question on IKEv2   Chris Arnold
      • [strongSwan] Question on IKEv2   Andreas Steffen
      • [strongSwan] Question on IKEv2   Chris Arnold
      • [strongSwan] Question on IKEv2   Kimmo Koivisto
      • [strongSwan] Question on IKEv2   Chris Arnold
      • [strongSwan] Question on IKEv2   Kimmo Koivisto
  • [strongSwan] Question on IKEv2   Chris Arnold
• [strongSwan] Strongswan is not responding for IKE packets from CISCO vpn client   SaRaVanAn
  • [strongSwan] Strongswan is not responding for IKE packets from CISCO vpn client   SaRaVanAn
    • [strongSwan] Strongswan is not responding for IKE packets from CISCO vpn client   SaRaVanAn
      • [strongSwan] Strongswan is not responding for IKE packets from CISCO vpn client   Cristina Vintila
      • [strongSwan] Strongswan is not responding for IKE packets from CISCO vpn client   SaRaVanAn
• [strongSwan] ipv6 address not printed correctly in phase1-up.sh   divya mohan
• [strongSwan] IKEv1 and IKEv2 behavior for NAT-T in Strongswan   SaRaVanAn
  • [strongSwan] IKEv1 and IKEv2 behavior for NAT-T in Strongswan   SaRaVanAn
• [strongSwan] Configuration Help needed on StrongSwan VPN server   SaRaVanAn
• [strongSwan] what does "sent QI2, ipsec sa established" on Initiator and "sent MR3, isakmp sa established" mean?   Rajiv Kulkarni
  • [strongSwan] what does "sent QI2, ipsec sa established" on Initiator and "sent MR3, isakmp sa established" mean?   Tobias Brunner
• [strongSwan] VPN Establishment   Daniel Palomares
  • [strongSwan] VPN Establishment   Tobias Brunner
• [strongSwan] Charon hangs after failing to delete Rekeyed IPsec SAs   anand rao
  • [strongSwan] Charon hangs after failing to delete Rekeyed IPsec SAs   Tobias Brunner
    • [strongSwan] Charon hangs after failing to delete Rekeyed IPsec SAs   anand rao
• [strongSwan] iPhone 3G connects fine, but Windows 7 doesn't!   Deniz Acay
  • [strongSwan] iPhone 3G connects fine, but Windows 7 doesn't!   Tobias Brunner
• [strongSwan] Performance Tuning   Chris Arnold
• [strongSwan] Establishing Multiple IPsec SAs   Daniel Palomares
• [strongSwan] Adding unity_split_include breaks SA negotiation   Meier, Rick
  • [strongSwan] Adding unity_split_include breaks SA negotiation   Tobias Brunner
• [strongSwan] Reporting Issue:Old CHILD_SA not getting cleared   Ghosh, Anurag (EXT-Aricent - IN)
  • [strongSwan] Reporting Issue:Old CHILD_SA not getting cleared   Ghosh, Anurag (EXT-Aricent - IN)
    • [strongSwan] Reporting Issue:Old CHILD_SA not getting cleared   Tobias Brunner
      • [strongSwan] Reporting Issue:Old CHILD_SA not getting cleared   Ghosh, Anurag (EXT-Aricent - IN)
      • [strongSwan] Reporting Issue:Old CHILD_SA not getting cleared   Ghosh, Anurag (EXT-Aricent - IN)
      • [strongSwan] Reporting Issue:Old CHILD_SA not getting cleared   Tobias Brunner
      • [strongSwan] Reporting Issue:Old CHILD_SA not getting cleared   Ghosh, Anurag (EXT-Aricent - IN)
      • [strongSwan] Reporting Issue:Old CHILD_SA not getting cleared   Tobias Brunner
• [strongSwan] (no subject)   nagaraj
• [strongSwan] Question on ESP tunnel configuration   nagaraj
  • [strongSwan] Question on ESP tunnel configuration   Andreas Steffen
• [strongSwan] IPSec SA's not coming up when the device is behind a NAT   Deepika Agarwal
  • [strongSwan] IPSec SA's not coming up when the device is behind a NAT   Tobias Brunner
    • [strongSwan] IPSec SA's not coming up when the device is behind a NAT   Deepika Agarwal
      • [strongSwan] IPSec SA's not coming up when the device is behind a NAT   Tobias Brunner
      • [strongSwan] IPSec SA's not coming up when the device is behind a NAT   Deepika Agarwal
      • [strongSwan] IPSec SA's not coming up when the device is behind a NAT   Tobias Brunner
• [strongSwan] Regarding Certificate based authentication ( Load Tests )   Narendra K A
  • [strongSwan] Regarding Certificate based authentication ( Load Tests )   Rajiv Kulkarni
    • [strongSwan] Regarding Certificate based authentication ( Load Tests )   Narendra K A
• [strongSwan] openswan and playbook issues   dan paolino
  • [strongSwan] openswan and playbook issues   Martin Willi
• [strongSwan] Ping is not working after establishing a tunnel in strongswan   SaRaVanAn
  • [strongSwan] Ping is not working after establishing a tunnel in strongswan   SaRaVanAn
  • [strongSwan] Ping is not working after establishing a tunnel in strongswan   Rajiv Kulkarni
    • [strongSwan] Ping is not working after establishing a tunnel in strongswan   SaRaVanAn
  • [strongSwan] Ping is not working after establishing a tunnel in strongswan   Tobias Brunner
    • [strongSwan] Ping is not working after establishing a tunnel in strongswan   SaRaVanAn
• [strongSwan] Does windows 7 clients work well with l2tp/ipsec using strongswan?   Morgan
  • [strongSwan] Does windows 7 clients work well with l2tp/ipsec using strongswan?   Morgan
    • [strongSwan] Does windows 7 clients work well with l2tp/ipsec using strongswan?   Morgan
• [strongSwan] process behaviour when tunnel is not established   Shukla, Sanjay
• [strongSwan] strongswan and playbook issues   dan paolino
  • [strongSwan] strongswan and playbook issues   Tobias Brunner
• [strongSwan] help: ping behaviour when tunnel is not established   Shukla, Sanjay
  • [strongSwan] help: ping behaviour when tunnel is not established   Shukla, Sanjay
    • [strongSwan] help: ping behaviour when tunnel is not established   Adrian Milanoski
  • [strongSwan] help: ping behaviour when tunnel is not established   Tobias Brunner
  • [strongSwan] help: ping behaviour when tunnel is not established   Hans-Kristian Bakke
    • [strongSwan] help: ping behaviour when tunnel is not established   Hans-Kristian Bakke
• [strongSwan] IPSec PKI error   Chris Arnold
  • [strongSwan] IPSec PKI error   Tobias Brunner
• [strongSwan] soft lifetime for inbound and outbound SA   divya mohan
  • [strongSwan] soft lifetime for inbound and outbound SA   Tobias Brunner
    • [strongSwan] soft lifetime for inbound and outbound SA   divya mohan
      • [strongSwan] soft lifetime for inbound and outbound SA   Tobias Brunner
• [strongSwan] Problem routing traffic to Public IP via Tunnel   Angel Kafazov
  • [strongSwan] Problem routing traffic to Public IP via Tunnel   Tobias Brunner
    • [strongSwan] Problem routing traffic to Public IP via Tunnel   Angel Kafazov
• [strongSwan] Questions on Strongswan   nagaraj
  • [strongSwan] Questions on Strongswan   Tobias Brunner
• [strongSwan] Multi WAN routing HOWTO ?   Anton
• [strongSwan] strongswan on Android devices   Nitin Verma
  • [strongSwan] strongswan on Android devices   Tobias Brunner
    • [strongSwan] strongswan on Android devices   Nitin Verma
      • [strongSwan] strongswan on Android devices   Tobias Brunner
      • [strongSwan] strongswan on Android devices   Nitin Verma
      • [strongSwan] strongswan on Android devices   Tobias Brunner
      • [strongSwan] strongswan on Android devices   Nitin Verma
• [strongSwan] Errors establishing connection   Rudolf Ladyzhenskii
  • [strongSwan] Errors establishing connection   Martin Willi
• [strongSwan] How to change group names in syslog   T Cheung
  • [strongSwan] How to change group names in syslog   Tobias Brunner
    • [strongSwan] How to change group names in syslog   T Cheung
      • [strongSwan] How to change group names in syslog   Tobias Brunner
• [strongSwan] can not reconnect from same ip   Morgan
  • [strongSwan] can not reconnect from same ip   Morgan
• [strongSwan] GRE over IPsec in Load-Tester Scenario   Mohan Krishna
  • [strongSwan] GRE over IPsec in Load-Tester Scenario   Martin Willi
• [strongSwan] Self signed ca cert fails policy check   Andreas Fett
  • [strongSwan] Self signed ca cert fails policy check   Martin Willi
    • [strongSwan] Self signed ca cert fails policy check   Andreas Fett
• [strongSwan] About migrating the milenage of 3GPP and the USIM card API   kenxin lau
  • [strongSwan] About migrating the milenage of 3GPP and the USIM card API   Martin Willi
    • [strongSwan] About migrating the milenage of 3GPP and the USIM card API   kenxin lau
    • [strongSwan] About migrating the milenage of 3GPP and the USIM card API   kenxin lau
  • [strongSwan] About migrating the milenage of 3GPP and the USIM card API   kenxin lau
• [strongSwan] SA establishment is trigerred by icmp traffic, when the rule is added for udp   divya mohan
  • [strongSwan] SA establishment is trigerred by icmp traffic, when the rule is added for udp   Martin Willi
    • [strongSwan] SA establishment is trigerred by icmp traffic, when the rule is added for udp   divya mohan
      • [strongSwan] SA establishment is trigerred by icmp traffic, when the rule is added for udp   divya mohan
• [strongSwan] Strongswan 4.2.0   derekbellino at comcast.net
  • [strongSwan] Strongswan 4.2.0   Andreas Steffen
• [strongSwan] Wrong choice of left(self) ip when route has changed   Anton
• [strongSwan] Sparatic tunnel issues   Stephen McGuinness
  • [strongSwan] Sparatic tunnel issues   Tobias Brunner
• [strongSwan] Strongswan2.8   derekbellino at comcast.net
  • [strongSwan] Strongswan2.8   Martin Willi
  • [strongSwan] Strongswan2.8   Andreas Steffen
• [strongSwan] Reg: 16 unknown bytes in ESp packet(IPSEC)   Mukesh Yadav
  • [strongSwan] Reg: 16 unknown bytes in ESp packet(IPSEC)   Andreas Steffen
    • [strongSwan] Reg: 16 unknown bytes in ESp packet(IPSEC)   Mukesh Yadav
      • [strongSwan] Reg: 16 unknown bytes in ESp packet(IPSEC)   Mukesh Yadav
• [strongSwan] Issues in setting up VPN connection(IKEv1) using iphone (Defult Cisco VPN client) and Strongswan 4.5.0 server   Kushagra Bhatnagar
  • [strongSwan] Issues in setting up VPN connection(IKEv1) using iphone (Defult Cisco VPN client) and Strongswan 4.5.0 server   Tobias Brunner
• [strongSwan] Send CA certificates during the ISAKMP phase   joern.mewes at gmx.net
• [strongSwan] INVALID_ID_INFORMATION in ikev1   Vinay Prabhakar M
• [strongSwan] INVALID_ID_INFORMATION error in ikev1   Vinay Prabhakar M
• [strongSwan] Delete payload error in Strongswan   SaRaVanAn

Last message date: Mon Apr 30 17:56:32 CEST 2012
Archived on: Tue Mar 4 15:05:02 CET 2014

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...