[strongSwan] Replacing Racoon2 with strongswan

bls s bls3427 at outlook.com
Thu Jul 29 01:45:41 CEST 2021

Here's what I use. Definitely works with ikev2 without  --enable-ikev2. Can't speak to ikev1. I use it with certificate-based authentication.

./configure --prefix= --enable-eap-mschapv2 --enable-eap-identity --enable-openssl --enable-eap-md5 --enable-eap-tls --enable-eap-dynamic --enable-systemd --enable-swanctl --disable-charon --disable-stroke --disable-scepclient --enable-counters

From: Users <users-bounces at lists.strongswan.org> On Behalf Of Paramashivaiah, Sunil
Sent: Tuesday, July 20, 2021 4:53 AM
To: users at lists.strongswan.org
Cc: Bhattacharjee, Debapriyo (c) <dbhattacharjee at rbbn.com>; Shivakumar Poojari <Shivakumar.Poojari at rbbn.com>
Subject: Re: [strongSwan] Replacing Racoon2 with strongswan

Hi All,

          If we configure strongswan  using the below options will it be sufficient to use it for Ikev1 and Ikev2.
          Please let me know if we need to add any more plugins like --enable-libipsec --enable-kernel-libipsec

           ./configure --prefix=/usr --sysconfdir=/etc --enable-charon  --enable-swanctl --enable-ikev2 --enable-ikev1 --enable-acert --enable-openssl

         Also by default will there be any plugins that will be enabled. Do we need to disable any plugins. Please suggest.

Thanks and Regards,

From: Paramashivaiah, Sunil
Sent: Tuesday, July 20, 2021 1:47 PM
To: users at lists.strongswan.org<mailto:users at lists.strongswan.org>
Cc: Shivakumar Poojari <Shivakumar.Poojari at rbbn.com<mailto:Shivakumar.Poojari at rbbn.com>>; Bhattacharjee, Debapriyo (c) <dbhattacharjee at rbbn.com<mailto:dbhattacharjee at rbbn.com>>
Subject: Replacing Racoon2 with strongswan

Hi All,

       We are planning to replace racoon2 with stongswan in our product for IPsec Ikev1 and Ikve2 functionality.
       We are trying to build strongswan on debian10 Linux and we find that there are lot of optional plugins available.
       Could anyone please guide us with required set of plugins that  we need to use to build strongswan for Ikev1 and Ikev2

Thanks and Regards,

Notice: This e-mail together with any attachments may contain information of Ribbon Communications Inc. and its Affiliates that is confidential and/or proprietary for the sole use of the intended recipient. Any review, disclosure, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please notify the sender immediately and then delete all copies, including any attachments.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20210728/0238895d/attachment-0001.html>

More information about the Users mailing list