[strongSwan] IPsec routing

[bluesky787 at posteo.de]

Oh, I just noticed that "nat"-table is already included in 
iptables-save. Nvm.

Am 07.11.2019 17:03 schrieb bluesky787 at posteo.de:
> Hi Noel,
> 
> Output from iptables-save can be found here:
> https://pastebin.com/Y9wDDAVu
> 
> Output from "iptables-save -t nat" can be found here:
> https://pastebin.com/R3iTSFiT
> 
> By pinging myself at 192.168.10.205, I wanted to point out that this
> subnet is registered and associated with a network device.
> 
> Regards,
> Bluesky787
> 
> Am 06.11.2019 22:28 schrieb Noel Kuntze:
>> Hello Bluesky787,
>> 
>> Please pastebin the output of `iptables-save`.
>> 
>> P.S.:Pinging your own IP is quite useless because it only tells you if
>> your communication over loopback works. ;)
>> 
>> Kind regards
>> 
>> Noel