[strongSwan] Problem setting IPSEC between StrongSwan and Cisco router

[Łukasz Wójcik]

Hello Robert,


Indeed. That change has fixed my issues ! Thank you a lot.


Best regards,

-ŁW

On 02-Jan-19 14:48, Robert Dahlem wrote:
> Shouldn't that be
>  18                                 local_ts = 192.168.200.0/24[gre]
>  19                                 remote_ts = 192.168.200.0/24[gre]
> instead?
>
> On 01.01.2019 22:27, Łukasz Wójcik wrote:
>
>> interface Tunnel0
>>  ip address 10.255.255.1 255.255.255.0
>>  no ip redirects
>>  ip nhrp map multicast dynamic
>>  ip nhrp network-id 1
>>  ip ospf network broadcast
>>  tunnel source GigabitEthernet0/1
>>  tunnel mode gre multipoint
>>  tunnel protection ipsec profile IPSECPROFILE