[strongSwan] Problem setting IPSEC between StrongSwan and Cisco router

[Robert Dahlem]

Shouldn't that be
 18                                 local_ts = 192.168.200.0/24[gre]
 19                                 remote_ts = 192.168.200.0/24[gre]
instead?

On 01.01.2019 22:27, Łukasz Wójcik wrote:

> interface Tunnel0
>  ip address 10.255.255.1 255.255.255.0
>  no ip redirects
>  ip nhrp map multicast dynamic
>  ip nhrp network-id 1
>  ip ospf network broadcast
>  tunnel source GigabitEthernet0/1
>  tunnel mode gre multipoint
>  tunnel protection ipsec profile IPSECPROFILE