[strongSwan] 答复: 答复: "%d" of initiator_id of load-tester does not start from 1 but 2.

Li Guanqun pluto851031 at hotmail.com
Wed Feb 28 10:59:38 CET 2018

Hi Tobias,

Sorry for misunderstanding about the fix.

Now it is clear to me.

And thanks for the advice on my concern, will have a try.

Thank you and have a nice day !



发件人: Tobias Brunner <tobias at strongswan.org>
发送时间: 2018年2月28日 8:33
收件人: Li Guanqun; users at lists.strongswan.org
抄送: guanqun.li.ext at nokia.com
主题: Re: 答复: [strongSwan] "%d" of initiator_id of load-tester does not start from 1 but 2.


> If the case you mentioned has been fixed in 5.2.1,

I never said that.  What I said is that the behavior changed with 5.2.0.
 But it has never been fixed, the fix can only be found in the
load-tester-id branch, which I pushed yesterday, so no released version
contains it.

> What I concern about is that if there are only 5 users configured in
> ipsec.db,
> and initiate all the 5 ipsec tunnels,
> since the first initiator_id starts from "2", the last one with "6"
> stays at CONNECTING status and could not be established.

Just adapt your server config to match the behavior on the client (i.e.
start the client IDs at 2 on the server too).  This is a testing tool,
so I don't really see a problem with that.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20180228/0e02e43d/attachment.html>

More information about the Users mailing list