[strongSwan] Android TNC server basic setup

[Andreas Steffen]

Hi Mark,

you can find a [little-outdated] TNC server configuration HOWTO
under the following link:

   https://wiki.strongswan.org/projects/strongswan/wiki/TNCS

In the meantime the TNC measurement policies are not hard-coded
any more in /etc/strongswan.conf but can be configured via the
strongTNC policy manager available from the strongSwan gitHub
repository

  https://wiki.strongswan.org/projects/strongswan/wiki/StrongTnc

The IMVs on the strongTNC server must now connect to the strongTNC 
/etc/pts/config.db database. A sample configuration can be found here

 
https://wiki.strongswan.org/projects/strongswan/wiki/IMA#Set-up-the-Attestation-Server

Hope this helps!

Andreas

On 11.01.2017 10:43, Mark M wrote:
> Hi,
>
> I would like to setup a basic demo of the android client using TNC
> connecting to a strongSwan server as show in in this guide -
> https://wiki.strongswan.org/projects/strongswan/wiki/BYOD
>
> Is there a guide I can follow for a basic strongSwan server setup to
> test out TNC with the android client? And is there anything special that
> needs to be configured on the android client or does the android client
> support TNC by default?
>
> Thanks,
>
> Mark

======================================================================
Andreas Steffen                         andreas.steffen at strongswan.org
strongSwan - the Open Source VPN Solution!          www.strongswan.org
Institute for Internet Technologies and Applications
University of Applied Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===========================================================[ITA-HSR]==

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3859 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.strongswan.org/pipermail/users/attachments/20170112/d8167013/attachment.bin>