[strongSwan] Strong swan 5.1.1 and Windows XP

[Lupi Loop]

Thank you very much Martin, that was the problem.

Now it is working!!!!!

Cheers

2014-12-10 14:20 GMT+01:00 Lupi Loop <lupitheloop at gmail.com>:
> Hi Martin,
>
> Thank you again for your answer.
>
> I have no longer access to the machines today, but I will check
> tomorrow and let you know.
>
> Cheers
>
> 2014-12-10 13:52 GMT+01:00 Martin Willi <martin at strongswan.org>:
>>
>>> Attached go the Strongswan and Shrew log for the connection.
>>
>> Shrew rejects the Quick Mode with:
>>
>>> 14/12/10 12:06:56 ii : phase2 rejected, id value mismatch
>>> 14/12/10 12:06:56 ii : - loc ANY:10.10.10.14:* -> ANY:0.0.0.0/0:*
>>> 14/12/10 12:06:56 ii : - rmt ANY:10.10.10.0/24:* -> ANY:10.10.10.14:*
>>
>> Looks like the traffic selectors don't match. What did you configure for
>> leftsubnet? Does that match to the remote subnet you have configured in
>> Shrew?
>>
>> Regards
>> Martin
>>