[strongSwan] DPD [lack of] interoperability between strongswan and Cisco IOS

Gerald Richter - ECOS richter at ecos.de
Mon Jun 17 07:12:57 CEST 2013

Hi Martin,

I had the same issue that DPD was not detected when connecting to a Cisco ASA. With your fix it is now working without problems.

Thanks & Regards


> -----Ursprüngliche Nachricht-----
> Von: users-bounces+richter=ecos.de at lists.strongswan.org [mailto:users-
> bounces+richter=ecos.de at lists.strongswan.org] Im Auftrag von Martin Willi
> Gesendet: Donnerstag, 6. Juni 2013 15:49
> An: Olivier PELERIN
> Cc: users at lists.strongswan.org
> Betreff: Re: [strongSwan] DPD [lack of] interoperability between strongswan
> and Cisco IOS
> Hi Olivier,
> > When I find some time I'll try to fix it and keep the task alive until
> > MM is complete.
> I've pushed a patch to [1], keeping the vendor ID task for the full
> Main/Aggressive mode. This should fix the detection of these late vendor IDs
> sent by Cisco IOS. Let me know if that works for you.
> Regards
> Martin
> [1]http://git.strongswan.org/?p=strongswan.git;a=commitdiff;h=57bc291a
> _______________________________________________
> Users mailing list
> Users at lists.strongswan.org
> https://lists.strongswan.org/mailman/listinfo/users

More information about the Users mailing list