[strongSwan] strongswan 5.0.1 ipsec configuration load issue

[yordanos beyene]

Thanks Martin. I will try this route.

Jordan.

On Fri, Jan 25, 2013 at 12:16 AM, Martin Willi <martin at strongswan.org>wrote:

> Hi Jordan,
>
> > I kept build flags from 5.0.0. and the only flag I added is  "CFLAGS +=
> > -DCONFIG_H_INCLUDED=1".  I use my own build files and I don't use
> > config.h.
>
> I think this is problematic. The build options have changed with the use
> of config.h, and I don't know how this behaves when not using it.
>
> If you want to use the same configuration, I recommend to pass just the
> same options to ./configure. We try hard to introduce new options
> disabled by default, and keep enabled options enabled.
>
> > root at ngfw:~# ipsec start
> > Starting strongSwan 5.0.1 IPsec [starter]...
> > /etc/ipsec.conf:3: syntax error [
> > ]
> > unable to start strongSwan -- fatal errors in config
>
> I have really no idea what's wrong. But I'd try to start from a
> clean, ./configure'd build before tracking this down further.
>
> Regards
> Martin
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20130125/8d80fbe6/attachment.html>