[strongSwan] IKEv2 Over IPv6
arnab.bakshi at gmail.com
Wed Jul 20 13:04:05 CEST 2011
Do we need to set any entry in iptables to ACCEPT the IKEv2 UDP ports
(500 & 4500) when using strongswan.
Actually I am trying to bring up the session with strongswan against one
of my implementation.
* Strongswan info:*
Release version: 4.5.2
Linux Flavour: Ubuntu- 0.10
Please let me know on this?...Actually this used to work on Strongswan
release 4.2.12 with kernel 2.6.9-22.EL and if we disable firewall.
On Thu, Jul 14, 2011 at 5:34 PM, Arnab Bakshi <arnab.bakshi at gmail.com>wrote:
> Thanks Andreas...
> I will use accordingly..
> On Thu, Jul 14, 2011 at 11:51 AM, Andreas Steffen <
> andreas.steffen at strongswan.org> wrote:
>> Hello Arnab,
>> it's great that you found out yourself that strongSwan has full IPv6
>> support. In very early Linux 2.6 kernels there was an issue with
>> IPv4-over-IPv6 tunnels but 2.6.35 is certainly fine.
>> Best regards
>> On 07/14/2011 06:43 AM, Arnab Bakshi wrote:
>>> Ok I think I got some info from here:
>>> Maybe if you can throw light on the required kernel version or any other
>>> points to be noted for me.
>>> On Thu, Jul 14, 2011 at 10:04 AM, Arnab Bakshi <arnab.bakshi at gmail.com
>>> <mailto:arnab.bakshi at gmail.com**>> wrote:
>>> Need one information regarding whether strongswan supports
>>> IKEv2 sessions over IPv6. My requirement is to carry IPv4 traffic
>>> over the IPv6 network and the SAs should be brought up using IKEv2
>>> over the IPv6 core.
>>> Also is there any dependency on the kernel version for the
>>> support. Right now I have the kernel version 2.6.35
>> Andreas Steffen andreas.steffen at strongswan.org
>> strongSwan - the Linux VPN Solution! www.strongswan.org
>> Institute for Internet Technologies and Applications
>> University of Applied Sciences Rapperswil
>> CH-8640 Rapperswil (Switzerland)
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Users