[strongSwan] routing between strongswan clients

[Andreas Steffen]

Hi Tito,

I changed the traffic selectors on alice and venus to

   rightsubnet=10.2.0.0/16,10.1.0.0/25

and on sun to

   leftsubnet=10.2.0.0/16,10.1.0.0/25

and alice can ping venus via sun:

   http://www.strongswan.org/uml/nat-two-rw/ikev2/index.html

Best regards

Andreas

On 05/23/2010 09:06 AM, Tito wrote:
> I configured and tested the example "Test ikev2/nat-two-rw".  from the
> strongswan web page:
> http://www.strongswan.org/uml/testresults43/ikev2/nat-two-rw/
>
> I am able to ping "sun" eth1 interface from "alice" and "venus", which
> works. What i would like to do is ping "alice" from "venus" or "venus"
> from "alince". Something like ping between road warrior clients going
> trough the gateway "sun"! If someone has done this before I would really
> appreciated if he can share to configure "sun" for that purpose.
>
> thank you in advance
>
> Tito

======================================================================
Andreas Steffen                         andreas.steffen at strongswan.org
strongSwan - the Linux VPN Solution!                www.strongswan.org
Institute for Internet Technologies and Applications
University of Applied Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===========================================================[ITA-HSR]==