[strongSwan] IKEv1 + radius

[Claude Tompers]

Hello,

Thank you for your quick answer.

best regards
Claude Tompers


On Monday 17 May 2010 09:40:32 Andreas Steffen wrote:
> Hello Claude,
> 
> the EAP plugins cannot be used with the IKEv1 pluto daemon.
> Since our development focus is clearly on IKEv2 (RFC 4306 is
> already 5 years old and should at last replace IKEv1!!!)
> we would implement RADIUS support for the proprietary IKEv1
> XAUTH protocol only if some organization would sponsor the
> effort.
> 
> Best regards
> 
> Andreas
> 
> On 17.05.2010 09:11, Claude Tompers wrote:
> > Hello alltogether,
> >
> > Is it possible to do radius authentication with the eap_radius module with IKEv1 ?
> > If not, will this feature be added ?
> >
> > thanks for your answers
> > Claude Tompers
> 
> ======================================================================
> Andreas Steffen                         andreas.steffen at strongswan.org
> strongSwan - the Linux VPN Solution!                www.strongswan.org
> Institute for Internet Technologies and Applications
> University of Applied Sciences Rapperswil
> CH-8640 Rapperswil (Switzerland)
> ===========================================================[ITA-HSR]==
> 

-- 
Claude Tompers
Ingénieur réseau et système
Fondation RESTENA - Réseau Téléinformatique de l'Education Nationale et de la Recherche
6, rue Richard Coudenhove-Kalergi
L-1359 Luxembourg

Tel: +352 424409 1
Fax: +352 422473
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.strongswan.org/pipermail/users/attachments/20100517/3c0ac42a/attachment.pgp>