[strongSwan] non-zero reserved fields in IKE_AUTH response.

Tobias Brunner tobias at strongswan.org
Tue Jun 29 18:55:44 CEST 2010


Hi Richard,

from the log it looks like the ID is parsed incorrectly (you could increase the
loglevel to see the details):

09[AUD] authentication of '2001:db8:f:1::1f5c57111eaff84b7' with pre-shared key
failed

The reason for this could be an alignment issue in the parser that has been
fixed in [1] (4.3.1 was the first release to contain that fix).  Since you are
running 4.1.10 on an embedded platform, there might well be other alignment
issues that have since been fixed, so please be aware.

Regards,
Tobias

[1] http://git.strongswan.org/?p=strongswan.git;a=commitdiff;h=42748858

-- 
======================================================================
Tobias Brunner                                   tobias at strongswan.org
strongSwan - The Linux VPN Solution!         http://www.strongswan.org
======================================================================




More information about the Users mailing list