[strongSwan] Strongswan and Umip

[Andreas Steffen]

Hello Francois,

it has been about two years since I last occupied myself with
Mobile IPv6. You write that no packets are leaving the MN
but you send me the mip6d.conf of the HA. Also it seems that
your MN is not colocated in a foreign net work but is back
in its home network. It would also be helpful to have the
ipsec.conf of the MN and the strongSwan log from the very
beginning, but please without lib 2 and enc 2 log-levels
since those are quite verbose.

Regards

Andreas

On 06.12.2010 09:36, Francois Bard wrote:
> Hi !
> 
> Thanks for the help about the logs the other day.
> I'm trying to use Umip with strongswan and I have some problems
> configuring it.
> 
> I succeeded configuring umip to work alone with other mip6d.conf
> files, i just can't get to make it work with strongswan. My problem is
> I can't even get the MN to send the first ISAKMP message
> ( IKE_SA_INIT ), it reaches ip6tnl1 but never eth0 according to wireshark.
> The ipsec daemon just keep on trying to send it but fails.
> 
> I joined several files. My strongswan.conf and ipsec.conf are as in the
> wiki,
> and everything seems fine with them in the logs I get.
> 
> 
> Any idea what the problem might be ?
> 
> Thanks
> 
> Francois Bard

======================================================================
Andreas Steffen                         andreas.steffen at strongswan.org
strongSwan - the Linux VPN Solution!                www.strongswan.org
Institute for Internet Technologies and Applications
University of Applied Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===========================================================[ITA-HSR]==