[strongSwan] IKE SA's are getting deleted

vivek bairathi bairathi.vivek at gmail.com
Tue Aug 3 10:19:18 CEST 2010

Hi All,

I got one issue resolved from the my problem mentioned in the mail below.
Actually only one IKE SA is getting created successfully and the other is
not. So, the SGW is sending IKE DELETE for both the IKE SA's.

But now a problem is coming that when I receive the delete for both the IKE
SA's then the IKE SA which was created successfully is not going down
completely as the SPD installed for it is not deleted and only the SAD
entries are deleted.

Q. Can you tell me is this a bug in the Strongswan IKEv2 stack?If yes, then
how to resolve it?Any clue, will also help.

Best Regards,
On Tue, Aug 3, 2010 at 11:33 AM, vivek bairathi <bairathi.vivek at gmail.com>wrote:

> Hi All,
> I am facing a problem. The problem is as following:-
> When I am initiating an IKE SA from my Computer towards the Security
> Gateway (SGW). At the same time, SGW is also initiating an IKE SA for the
> same configuration. Both the IKE SA's are created successfully but as soon
> as both the SA's are created two IKE delete message comes from the SGW and
> both my SA's get deleted.
> Q. Can you tell me what can be the reason behind this?
> Q. Is it correct according to the IKEv2 Protocol?
> Regards,
> Vivek
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20100803/4d630583/attachment.html>

More information about the Users mailing list