[strongSwan] strongswan no shared key found

[Chasing Vega]

Appreciate the reply. I will try and contact them.

On Thu, 2 Sept 2021 at 01:09, Tobias Brunner <tobias at strongswan.org> wrote:

> Hi,
>
> > [ENC] generating QUICK_MODE request 925866246 [ HASH SA No ID ID ]
> > [NET] sending packet: from locip[500] to ipsecip[500] (172 bytes)
> > [NET] received packet: from ipsecip[500] to locip[500] (108 bytes)
> > [ENC] parsed INFORMATIONAL_V1 request 3675363864 [ HASH N((24576)) ]
> > [IKE] received (24576) notify
> > [NET] received packet: from ipsecip[500] to locip[500] (92 bytes)
> > [ENC] parsed INFORMATIONAL_V1 request 2592328021 [ HASH N(NO_PROP) ]
> > [IKE] received NO_PROPOSAL_CHOSEN error notify
> >
> > Does anyone know how I could proceed?
>
> You received a NO_PROPOSAL_CHOSEN notify to the Quick Mode request, so
> what you configured in esp_proposals or mode is apparently not what the
> peer expected.  Maybe there is no PFS, so try removing modp1024 from the
> ESP proposal.  Or it should be tunnel mode, i.e. set mode=tunnel (or
> remove the setting), with or without PFS.  If none of that works,
> contact the admins to learn what the correct settings actually are (of
> course, you should have started with that in the first place :).
>
> Regards,
> Tobias
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20210906/318a45c3/attachment.html>