[strongSwan] pools attrs

[Volodymyr Litovka]

Hi colleagues,

are there any ways to get remote side attributes, specified in "pools" 
section, like:

pools {
         s1-pool {
                 addrs = 25.0.0.2-25.0.1.255
                 netmask = "255.255.254.0"
         }
}

at the moment, my updown script on the client shows the following ones 
upon launch:

updown: PLUTO_PEER_ID=s1
updown: PLUTO_ME=10.1.2.10
updown: PLUTO_IF_ID_OUT=10
updown: PLUTO_PEER_CLIENT=0.0.0.0/0
updown: PLUTO_IF_ID_IN=10
updown: PLUTO_VERSION=1.1
updown: PLUTO_REQID=1
updown: PLUTO_MY_PORT=0
updown: PLUTO_MY_PROTOCOL=0
updown: PLUTO_PEER_PORT=0
updown: PLUTO_MY_SOURCEIP4_1=25.0.0.2
updown: PLUTO_CONNECTION=s2
updown: PLUTO_PEER_PROTOCOL=0
updown: PLUTO_MY_CLIENT=0.0.0.0/0
updown: PLUTO_MY_ID=s2
updown: PLUTO_PEER=10.1.1.10
updown: PLUTO_VERB=up-client
updown: PLUTO_INTERFACE=eth0
updown: PLUTO_UNIQUEID=1
updown: PLUTO_MY_SOURCEIP=25.0.0.2
updown: PLUTO_PROTO=esp
updown: PLUTO_UDP_ENC=4500

and there is no information on 'netmask' which is specified on the server.

Thank you.

-- 
Volodymyr Litovka
   "Vision without Execution is Hallucination." -- Thomas Edison

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20210408/1b671a8c/attachment.html>