[strongSwan] IPtables settings

[cristiant at newro.co]

Also it ipsec.conf file

# basic configuration
config setup
         charondebug="all"
         uniqueids=yes
         strictcrlpolicy=no

# connection to paris datacenter
conn totorum-to-camulodunum
   authby=secret
   left=%defaultroute
   leftid=111.111.111.45
   leftsubnet=172.16.11.0/24
   right=222.222.222.210
   rightsubnet=172.16.15.0/24
   ike=aes256-sha2_256-modp1024!
   esp=aes256-sha2_256!
   keyingtries=0
   ikelifetime=1h
   lifetime=8h
   dpddelay=30
   dpdtimeout=120
   dpdaction=restart
   auto=start

On 1/13/20 4:15 PM, Felipe Arturo Polanco wrote:
> Hi,
>
> Please send us the following information:
>
> Strongswan configuration and
> Output of:
> iptables-save
> ip xfrm policy
> ip route show
> ip rule show
> ip address show
>
> Thanks,
>
>
> On Mon, Jan 13, 2020 at 10:13 AM cristiant at newro.co 
> <mailto:cristiant at newro.co> <cristiant at newro.co 
> <mailto:cristiant at newro.co>> wrote:
>
>     Hello,
>
>     I am trying to set up a point-to-point VPN connection between two KVM
>     hosts running Ubuntu 18.04 LTS.
>
>     For struggling fro more then a week to make it work but without
>     success.
>
>     The tunnel seams to be running but I cannot make the connection
>     between
>     internal subenets.
>
>     Can anyone tell me what iptables rules should I set?
>
>     Thank you!
>
>     Best regards!
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20200113/ccc75db8/attachment.html>