[strongSwan] Not Able to Connect

Noel Kuntze noel.kuntze+strongswan-users-ml at thermi.consulting
Tue Mar 27 20:36:51 CEST 2018


As I previously iterated, you need to set remote_addrs on the ikev2-pubkey config to your subnet. You put it in the wrong section and also didn't put the subnet in it.


On 27.03.2018 20:32, Info wrote:
>
> Nothing has worked.  So starting over again, with another new config, pro forma <https://wiki.strongswan.org/projects/strongswan/wiki/HelpRequests>.
>
> Running CentOS 7.4 with IPSec gateway as OpenStack VM, DNATted to and SNATted from by LAN gateway.  Certs only, SELinux permissive, firewall down.
>
> The remote Android Strongswan app (initiator) is set:
> Server: quantum-equities.com                VPN Type IKEv2 certificate
> User certificate:  aries                            User Identity:  Default
> CA cert: Select automatically                  Profile name: cygnus
> Adv. Server ID:  cygnus.darkmatter.org   Send cert requests
> Custom subnets: 192.168.1.0/24
>
>
> _strongswan.conf:_
> charon {
>         load_modular = yes
>         plugins {
>                 include strongswan.d/charon/*.conf
>         }
> }
> include strongswan.d/*.conf
>
> _charon.conf_
>
>        # Needed to avoid in journalctl "fragmented IKE message is too large"
>         max_packet = 30000
>
>         filelog {
>                 /var/log/charon.log {
>                 time_format = %a, %Y-%m-%d %R
>                 ike_name = yes
>                 append = no
>                 default = 2
>                 flush_line = yes
>
>                 mgr = 0
>                 net = 1
>                 enc = 1
>                 asn = 1
>                 job = 1
>                 knl = 1
>                 }
>         }
> }
>
>
> _swanctl.conf_
>
> connections {
>
>         ikev2-pubkey {
>                 remote_addrs = %any
>                 local {
>                 }
>                 remote {
>                 }
>
>                 children {
>                         remote_ts = 192.168.1.0/24
>                         local_ts = 192.168.1.0/24
>                         local_addrs = 192.168.1.16
>                         remote_addrs = 192.168.1.5
>                         mode = transport
>                 }
>         }
> }
>
> # swanctl -L
> ikev2-pubkey: IKEv1/2, no reauthentication, rekeying every 14400s
>   local:  %any
>   remote: %any
>   local unspecified authentication:
>   remote unspecified authentication:
> # swanctl -l
> #
>
> # ip route show table all
> default via 192.168.1.1 dev eth0
> 169.254.0.0/16 dev eth0 scope link metric 1002
> 192.168.111.0/24 dev eth0 proto kernel scope link src 192.168.1.16
> broadcast 127.0.0.0 dev lo table local proto kernel scope link src 127.0.0.1
> local 127.0.0.0/8 dev lo table local proto kernel scope host src 127.0.0.1
> local 127.0.0.1 dev lo table local proto kernel scope host src 127.0.0.1
> broadcast 127.255.255.255 dev lo table local proto kernel scope link src 127.0.0.1
> broadcast 192.168.1.0 dev eth0 table local proto kernel scope link src 192.168.1.16
> local 192.168.1.16 dev eth0 table local proto kernel scope host src 192.168.1.16
> broadcast 192.168.1.255 dev eth0 table local proto kernel scope link src 192.168.1.16
> unreachable ::/96 dev lo metric 1024 error -113
> unreachable ::ffff:0.0.0.0/96 dev lo metric 1024 error -113
> unreachable 2002:a00::/24 dev lo metric 1024 error -113
> unreachable 2002:7f00::/24 dev lo metric 1024 error -113
> unreachable 2002:a9fe::/32 dev lo metric 1024 error -113
> unreachable 2002:ac10::/28 dev lo metric 1024 error -113
> unreachable 2002:c0a8::/32 dev lo metric 1024 error -113
> unreachable 2002:e000::/19 dev lo metric 1024 error -113
> unreachable 3ffe:ffff::/32 dev lo metric 1024 error -113
> fe80::/64 dev eth0 proto kernel metric 256
> local ::1 dev lo table local proto kernel metric 0
> local fe80::5054:ff:fec0:9330 dev lo table local proto kernel metric 0
> ff00::/8 dev eth0 table local metric 256
>
>
> #  ip address
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>     inet 127.0.0.1/8 scope host lo
>        valid_lft forever preferred_lft forever
>     inet6 ::1/128 scope host
>        valid_lft forever preferred_lft forever
> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
>     link/ether 52:54:00:c0:93:30 brd ff:ff:ff:ff:ff:ff
>     inet 192.168.1.16/24 brd 192.168.1.255 scope global eth0
>        valid_lft forever preferred_lft forever
>     inet6 fe80::5054:ff:fec0:9330/64 scope link
>        valid_lft forever preferred_lft forever
>
>
> # iptables-save
> # Generated by iptables-save v1.4.21 on Tue Mar 27 11:19:49 2018
> *nat
> :PREROUTING ACCEPT [21:3556]
> :INPUT ACCEPT [21:3556]
> :OUTPUT ACCEPT [25:1200]
> :POSTROUTING ACCEPT [25:1200]
> COMMIT
> # Completed on Tue Mar 27 11:19:49 2018
> # Generated by iptables-save v1.4.21 on Tue Mar 27 11:19:49 2018
> *mangle
> :PREROUTING ACCEPT [195:20990]
> :INPUT ACCEPT [195:20990]
> :FORWARD ACCEPT [0:0]
> :OUTPUT ACCEPT [143:13859]
> :POSTROUTING ACCEPT [142:13775]
> COMMIT
> # Completed on Tue Mar 27 11:19:49 2018
> # Generated by iptables-save v1.4.21 on Tue Mar 27 11:19:49 2018
> *raw
> :PREROUTING ACCEPT [195:20990]
> :OUTPUT ACCEPT [142:13775]
> COMMIT
> # Completed on Tue Mar 27 11:19:49 2018
> # Generated by iptables-save v1.4.21 on Tue Mar 27 11:19:49 2018
> *filter
> :INPUT ACCEPT [195:20990]
> :FORWARD ACCEPT [0:0]
> :OUTPUT ACCEPT [142:13775]
> COMMIT
> # Completed on Tue Mar 27 11:19:49 2018
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://lists.strongswan.org/pipermail/users/attachments/20180327/eee7f53b/attachment-0001.sig>


More information about the Users mailing list