[strongSwan] received TS_UNACCEPTABLE notify, no CHILD_SA built
Sujoy
sujoy.b at mindlogicx.com
Thu Feb 8 07:26:45 CET 2018
Hi Jafar, Peer is also using strongswan 5.3.3. following is the
configuration. We need tunnel because once it is connected in LAN we
want to implement in WAN/Internet. Output of the 192.168.10.40 is bellow.
Config setup
charondebug="all"
uniqueids=yes
strictcrlpolicy=yes
conn %default
conn tunnel #
left=%any
right=192.168.10.38
rightsubnet=192.168.10.38/24
ike=aes256-sha1-modp2048!
esp=aes256-sha1-modp2048!
keyingtries=1
ikelifetime=1h
lifetime=8h
dpddelay=30
#dpdtimeout=120
dpdaction=restart
authby=psk
auto=route
keyexchange=ikev2
type=tunnel
root at server:~# ipsec statusall
Status of IKE charon daemon (strongSwan 5.3.3, Linux 4.4.0-112-generic,
x86_64):
uptime: 114 minutes, since Feb 08 09:58:49 2018
malloc: sbrk 2703360, mmap 0, used 513168, free 2190192
worker threads: 7 of 16 idle, 5/0/4/0 working, job queue: 0/0/0/0,
scheduled: 5
loaded plugins: charon aes kernel-libipsec des rc2 sha1 sha2 md5
random nonce x509 revocation constraints pubkey pkcs1 pkcs7 pkcs8 pkcs12
pgp dnskey sshkey pem openssl fips-prf gmp xcbc cmac hmac curl attr
kernel-netlink resolve socket-default stroke updown xauth-generic
Listening IP addresses:
192.168.10.40
10.8.0.1
Connections:
tunnel: %any...192.168.10.38 IKEv2, dpddelay=30s
tunnel: local: uses pre-shared key authentication
tunnel: remote: [192.168.10.38] uses pre-shared key authentication
tunnel: child: dynamic === 192.168.10.0/24 TUNNEL,
dpdaction=restart
Security Associations (1 up, 0 connecting):
tunnel[3]: ESTABLISHED 25 minutes ago,
192.168.10.40[192.168.10.40]...192.168.10.38[192.168.10.38]
tunnel[3]: IKEv2 SPIs: c1a42433ade9fa28_i a52cfea6d767c397_r*,
pre-shared key reauthentication in 24 minutes
tunnel[3]: IKE proposal:
AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_2048
Thanks
On Wednesday 07 February 2018 09:06 PM, Jafar Al-Gharaibeh wrote:
>
>
> On 2/7/2018 9:22 AM, Sujoy wrote:
>>
>> Thanks Jafar, for the reply. But after removing subnet from the
>> config also tunneling failed. Is there any issue with the version of
>> strongswan 5.3.3. What means "TS_UNACCEPTABLE notify, no CHILD_SA built"
>>
> "TS_UNACCEPTABLE notify" means the peer didn't like the proposed
> traffic selector. The log shows that your IKE SA is up, so you don't
> have a problem there. I can't tell you what your rightsubnet should be
> unless you tell us more about the setup you have. What is your peer
> running? is it also strongSwan?
>
> If you only want to encrypt traffic from 192.168.10.38 to
> 192.168.10.40 and you don't have other subnets/hosts, you can switch
> the connection type to transport mode ("type=trasnport"). Both sides
> must agree on this. transport doesn't require left/rightsubnets.
>
> --Jafar
>
>>
>> Config setup
>>
>> charondebug="all"
>> uniqueids=yes
>> strictcrlpolicy=yes
>> conn %default
>> conn tunnel #
>> left=%any
>> right=192.168.10.40
>> ike=aes256-sha1-modp2048!
>> esp=aes256-sha1-modp2048!
>> keyingtries=1
>> ikelifetime=1h
>> lifetime=8h
>> dpddelay=30
>> #dpdtimeout=120
>> dpdaction=restart
>> authby=secret
>> auto=route
>> keyexchange=ikev2
>> type=tunnel
>>
>>
>> root at client:~# ipsec up tunnel
>> initiating IKE_SA tunnel[1] to 192.168.10.40
>> generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP)
>> N(HASH_ALG) ]
>> sending packet: from 192.168.10.38[500] to 192.168.10.40[500] (448 bytes)
>> received packet: from 192.168.10.40[500] to 192.168.10.38[500] (456
>> bytes)
>> parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP)
>> N(HASH_ALG) N(MULT_AUTH) ]
>> remote host is behind NAT
>> no IDi configured, fall back on IP address
>> authentication of '192.168.10.38' (myself) with pre-shared key
>> establishing CHILD_SA tunnel
>> generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) IDr AUTH SA TSi
>> TSr N(MOBIKE_SUP) N(ADD_4_ADDR) N(ADD_4_ADDR) N(ADD_4_ADDR)
>> N(ADD_4_ADDR) N(ADD_4_ADDR) N(ADD_4_ADDR) N(ADD_4_ADDR) N(ADD_4_ADDR)
>> N(MULT_AUTH) N(EAP_ONLY) ]
>> sending packet: from 192.168.10.38[4500] to 192.168.10.40[4500] (348
>> bytes)
>> received packet: from 192.168.10.40[4500] to 192.168.10.38[4500] (156
>> bytes)
>> parsed IKE_AUTH response 1 [ IDr AUTH N(AUTH_LFT) N(MOBIKE_SUP)
>> N(ADD_4_ADDR) N(TS_UNACCEPT) ]
>> authentication of '192.168.10.40' with pre-shared key successful
>> IKE_SA tunnel[1] established between
>> 192.168.10.38[192.168.10.38]...192.168.10.40[192.168.10.40]
>> scheduling reauthentication in 2819s
>> maximum IKE_SA lifetime 3359s
>> *received TS_UNACCEPTABLE notify, no CHILD_SA built**
>> **failed to establish CHILD_SA, keeping IKE_SA*
>> received AUTH_LIFETIME of 2637s, scheduling reauthentication in 2097s
>> peer supports MOBIKE
>> establishing connection 'tunnel' failed
>>
>>
>> root at client:~# ipsec statusall
>> Status of IKE charon daemon *(strongSwan 5.3.3, Linux
>> 4.4.0-112-generic, x86_64)*:
>> uptime: 2 minutes, since Feb 07 20:44:23 2018
>> malloc: sbrk 2703360, mmap 0, used 519600, free 2183760
>> worker threads: 7 of 16 idle, 5/0/4/0 working, job queue: 0/0/0/0,
>> scheduled: 4
>> loaded plugins: charon aes kernel-libipsec des rc2 sha1 sha2 md5
>> random nonce x509 revocation constraints pubkey pkcs1 pkcs7 pkcs8
>> pkcs12 pgp dnskey sshkey pem openssl fips-prf gmp xcbc cmac hmac curl
>> attr kernel-netlink resolve socket-default stroke updown xauth-generic
>> Listening IP addresses:
>> 192.168.10.38
>> 192.168.3.107
>>
>> Connections:
>> tunnel: %any...192.168.10.40 IKEv2, dpddelay=30s
>> tunnel: local: uses pre-shared key authentication
>> tunnel: remote: [192.168.10.40] uses pre-shared key
>> authentication
>> tunnel: child: dynamic === dynamic TUNNEL, dpdaction=restart
>> Security Associations (1 up, 0 connecting):
>> tunnel[1]: ESTABLISHED 2 minutes ago,
>> 192.168.10.38[192.168.10.38]...192.168.10.40[192.168.10.40]
>> tunnel[1]: IKEv2 SPIs: 175dcf9cdcf11b38_i* 9cc05896738a5e45_r,
>> pre-shared key reauthentication in 32 minutes
>> tunnel[1]: IKE proposal:
>> AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_2048
>>
>> Thanks
>>
>> On Wednesday 07 February 2018 08:31 PM, Jafar Al-Gharaibeh wrote:
>>> Sujoy,
>>>
>>> Are you sure about
>>>
>>> rightsubnet=192.168.10.0/32
>>>
>>> This subnet gets you nothing unless you know that it has a special
>>> meaning in the config that I'm not aware of. You can have the least
>>> significant octet set to zero with a 32-bit netmask. What is the
>>> rightsubnet that you are trying to protect? is it all
>>> 192.168.10.0/24? or just one host like 192.168.10.100?
>>>
>>> --Jafar
>>>
>>>
>>>
>>> On 2/7/2018 12:44 AM, Sujoy wrote:
>>>>
>>>> Hi Noel,
>>>>
>>>> Still cannot establish tunnel. logs doesn't show anything. Can
>>>> someone help to solve this.
>>>>
>>>> Client configuration
>>>>
>>>> config setup
>>>>
>>>> charondebug="all"
>>>> uniqueids=yes
>>>> strictcrlpolicy=no
>>>> conn %default
>>>> conn tunnel #
>>>> left=%any
>>>> right=192.168.10.40
>>>> rightsubnet=192.168.10.0/32
>>>> ike=aes128-md5-modp1536
>>>> esp=aes128-sha1
>>>> keyingtries=%forever
>>>> ikelifetime=1h
>>>> lifetime=8h
>>>> dpddelay=30
>>>> #dpdtimeout=120
>>>> #dpdaction=restart
>>>> authby=secret
>>>> auto=start
>>>> keyexchange=ikev2
>>>> type=tunnel
>>>> mobike=no
>>>> #pfs=no
>>>> reauth=no
>>>>
>>>> Server setup
>>>>
>>>> config setup
>>>>
>>>> charondebug="all"
>>>> uniqueids=yes
>>>> strictcrlpolicy=no
>>>> conn %default
>>>> conn tunnel #conn %default
>>>> conn tunnel #
>>>> left=%any
>>>> right=192.168.10.40
>>>> rightsubnet=192.168.10.0/32
>>>> ike=aes128-md5-modp1536
>>>> esp=aes128-sha1
>>>> keyingtries=%forever
>>>> ikelifetime=1h
>>>> lifetime=8h
>>>> dpddelay=30
>>>> #dpdtimeout=120
>>>> #dpdaction=restart
>>>> authby=secret
>>>> auto=start
>>>> keyexchange=ikev2
>>>> type=tunnel
>>>> mobike=no
>>>> #pfs=no
>>>> reauth=no
>>>>
>>>>
>>>> root at client:~# *ipsec up tunnel*
>>>> initiating IKE_SA tunnel[2] to 192.168.10.40
>>>> generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP)
>>>> N(NATD_D_IP) N(HASH_ALG) ]
>>>> sending packet: from 192.168.10.38[500] to 192.168.10.40[500] (1064
>>>> bytes)
>>>> received packet: from 192.168.10.40[500] to 192.168.10.38[500] (38
>>>> bytes)
>>>> parsed IKE_SA_INIT response 0 [ N(INVAL_KE) ]
>>>> peer didn't accept DH group MODP_2048, it requested MODP_1536
>>>> initiating IKE_SA tunnel[2] to 192.168.10.40
>>>> generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP)
>>>> N(NATD_D_IP) N(HASH_ALG) ]
>>>> sending packet: from 192.168.10.38[500] to 192.168.10.40[500] (1000
>>>> bytes)
>>>> received packet: from 192.168.10.40[500] to 192.168.10.38[500] (392
>>>> bytes)
>>>> parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP)
>>>> N(HASH_ALG) N(MULT_AUTH) ]
>>>> remote host is behind NAT
>>>> no IDi configured, fall back on IP address
>>>> authentication of '192.168.10.38' (myself) with pre-shared key
>>>> establishing CHILD_SA tunnel
>>>> generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) IDr AUTH SA TSi
>>>> TSr N(MULT_AUTH) N(EAP_ONLY) ]
>>>> sending packet: from 192.168.10.38[4500] to 192.168.10.40[4500]
>>>> (332 bytes)
>>>> received packet: from 192.168.10.40[4500] to 192.168.10.38[4500]
>>>> (108 bytes)
>>>> parsed IKE_AUTH response 1 [ IDr AUTH N(TS_UNACCEPT) ]
>>>> authentication of '192.168.10.40' with pre-shared key successful
>>>> IKE_SA tunnel[2] established between
>>>> 192.168.10.38[192.168.10.38]...192.168.10.40[192.168.10.40]
>>>> scheduling rekeying in 2525s
>>>> maximum IKE_SA lifetime 3065s
>>>> *received TS_UNACCEPTABLE notify, no CHILD_SA built**
>>>> **failed to establish CHILD_SA, keeping IKE_SA**
>>>> **establishing connection 'tunnel' failed*
>>>> root at client:~#
>>>>
>>>>
>>>> Ipsec statusall
>>>>
>>>> Status of IKE charon daemon (*strongSwan 5.3.3, Linux
>>>> 4.4.0-112-generic, x86_64*):
>>>> uptime: 41 seconds, since Feb 07 12:08:32 2018
>>>> malloc: sbrk 2703360, mmap 0, used 519216, free 2184144
>>>> worker threads: 7 of 16 idle, 5/0/4/0 working, job queue:
>>>> 0/0/0/0, scheduled: 2
>>>> loaded plugins: charon aes kernel-libipsec des rc2 sha1 sha2 md5
>>>> random nonce x509 revocation constraints pubkey pkcs1 pkcs7 pkcs8
>>>> pkcs12 pgp dnskey sshkey pem openssl fips-prf gmp xcbc cmac hmac
>>>> curl attr kernel-netlink resolve socket-default stroke updown
>>>> xauth-generic
>>>> Listening IP addresses:
>>>> 192.168.10.38
>>>> 192.168.3.107
>>>>
>>>> Connections:
>>>> tunnel: %any...192.168.10.40 IKEv2
>>>> tunnel: local: uses pre-shared key authentication
>>>> tunnel: remote: [192.168.10.40] uses pre-shared key
>>>> authentication
>>>> tunnel: child: dynamic === 192.168.10.0/32 TUNNEL
>>>> Security Associations (1 up, 0 connecting):
>>>> tunnel[1]: ESTABLISHED 41 seconds ago,
>>>> 192.168.10.38[192.168.10.38]...192.168.10.40[192.168.10.40]
>>>> tunnel[1]: IKEv2 SPIs: 53b251675b863a7d_i*
>>>> 57d33cd8149f729f_r, rekeying in 41 minutes
>>>> tunnel[1]: IKE proposal:
>>>> AES_CBC_128/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1536
>>>>
>>>>
>>>> On Tuesday 16 January 2018 11:23 PM, Noel Kuntze wrote:
>>>>> Hi,
>>>>>
>>>>> Check the logs of the remote side.
>>>>> It means the remote peer did not like the proposed traffic selector. It was probably outside of the network range that its own configuration allows, meaning narrowing failed.
>>>>>
>>>>> Kind regards
>>>>>
>>>>> Noel
>>>>>
>>>>>
>>>>> On 16.01.2018 07:25, Sujoy wrote:
>>>>>> Hi Noel,
>>>>>>
>>>>>> Same strongswan 5.3.3 configuration working in my VM(client) to desktop server. But not working from my OpenWRT to Global IP used nated Linux server. Can you help me to solve this.
>>>>>>
>>>>>> what means "received TS_UNACCEPTABLE notify, no CHILD_SA built"
>>>>>>
>>>>>> Server config file.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Thanks & Regards
>>>>>>
>>>>>> Sujoy
>>>>>>
>>>>>> On Thursday 04 January 2018 03:38 AM, Noel Kuntze wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> Only on the responder.
>>>>>>> If you use dpd and enforce UDP encapsulation, you do not need to open any ports on the initiator side.
>>>>>>> Refer to the UsableExamples wiki page[1] for example configurations that are usable in the real world.
>>>>>>>
>>>>>>> Kind regards
>>>>>>>
>>>>>>> Noel
>>>>>>>
>>>>>>> [1]https://wiki.strongswan.org/projects/strongswan/wiki/UsableExamples
>>>>>>>
>>>>>>> On 28.12.2017 08:51, Sujoy wrote:
>>>>>>>> Hi All,
>>>>>>>>
>>>>>>>>
>>>>>>>> We want to implement StrongSwan,with IPsec in OpenWRT. IPSec server will be running in CentOS and the OpenWRt router will connect to it using VPN. I have configured the server part, struggling to configure the client part. Do we need to open port 4500 for this first.
>>>>>>>>
>>>>>>>> Anyone can suggest any solution for this.
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20180208/10e7e76b/attachment-0001.html>
More information about the Users
mailing list