[strongSwan] Rigthid diferent to right problem.
jcasanellas at solventait.com
Fri May 26 07:49:39 CEST 2017
I'm have a problem with a 3 connections vpn ipsec site to site with Cisco
The problem I have is that the client has virtual vpbox with Movistar.
In the 3 vpn the "rightid" is the same to sign
So to be able to lift the vpn I need to sign with a different ip than the
Currently I have it working in this way from the Cisco to the provider
But I want to pass it on to strongswan
In the file configuration file.conf is the following:
---START CONFIG ---
rightid=126.96.36.199 (is necessary for sign)
----- END CONFIG ----
I'm test with rightid=%any and not working
I'm test with rightid same with right parameter its working but not work
traffic and tunnel not up.
Im found this plugin duplicheck
But i'm need sign vpn with another ip.
----ERROR Syslog ---
May 25 18:36:22 CL2017032010001 charon: 10[ENC] parsed INFORMATIONAL_V1
request 2895156184 [ HASH N((24576)) ]
May 25 18:36:22 CL2017032010001 charon: 10[IKE] received (24576) notify
May 25 18:36:22 CL2017032010001 charon: 11[NET] received packet: from
xx.xx.xxx.xx to xx.xx.xx.xx (356 bytes)
May 25 18:36:22 CL2017032010001 charon: 11[ENC] parsed INFORMATIONAL_V1
request 1735012586 [ HASH N(INVAL_ID) ]
May 25 18:36:22 CL2017032010001 charon: 11[IKE] received
INVALID_ID_INFORMATION error notify
--ERROR Syslog ---
Thank you very much.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Users