[strongSwan] Traffic Selectors

[Aanand Ramachandran]

Hi - would appreciate it if someone can help me with this question.

________________________________
From: Aanand Ramachandran <aanandr at outlook.com>
Sent: Sunday, February 26, 2017 11:06:18 PM
To: users at lists.strongswan.org
Subject: Traffic Selectors


Hi - per this article i should be able to achieve split-tunnel on a Strongswan client by configuring the right TS subnets on the server. The article explains that clients most of the time send 0.0.0.0, so the server can be configured (leftsubnet parameter) to send back those subnets that can be accessed over the VPN connection.


https://wiki.strongswan.org/projects/strongswan/wiki/ForwardingAndSplitTunneling


However, this doesnt seem to work on Android OepnVPN. In spite of configuring the right traffic selector on the server all traffic from the client is sent to the VPN interface.


Can you help me out with this?

<https://wiki.strongswan.org/projects/strongswan/wiki/ForwardingAndSplitTunneling>

ForwardingAndSplitTunneling - strongSwan<https://wiki.strongswan.org/projects/strongswan/wiki/ForwardingAndSplitTunneling>
wiki.strongswan.org
Introduction to strongSwan: Forwarding and Split-Tunneling¶ Introduction to strongSwan: Forwarding and Split-Tunneling. Forwarding Client Traffic

thanks,

Aanand

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20170228/93958070/attachment.html>