[strongSwan] Monitoring stronswan

[Thomas Will]

Hi

Try ike-scan

regards


Am 14.12.2017 um 11:40 schrieb Michael Stiller:
> Hi.
>
> What i do is, that i have another strongswan setup on (another) monitoring machine.
>
> This one tries to connect to the vpn server periodically using a special "monitoring user / monitoring command”.
>
> After the connection succeeded i do a “curl” to an "ip address mirror” and compare it with the expected value (e.g. address of the vpn server)
>
> If not -> alarm.
>
> Best regards,
>
> Michael
>
>
>> On 14. Dec 2017, at 11:29, Michael Schwartzkopff <ms at sys4.de> wrote:
>>
>> Hi,
>>
>>
>> What is the best way to do a fault monitoring of a strongswan server? In
>> the first place, my monitoring service should check if the server is
>> able to offer the VPN service, which means i.e. that UDP/500 will send a
>> correct answer if checked from the outside.
>>
>>
>> Any ideas?
>>
>>
>> Mit freundlichen Grüßen,
>>
>> -- 
>>
>> [*] sys4 AG
>>
>> https://sys4.de, +49 (89) 30 90 46 64
>> Schleißheimer Straße 26/MG,80333 München
>>
>> Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
>> Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief
>> Aufsichtsratsvorsitzender: Florian Kirstein
>>
>>

-- 
Thomas Will

Xinux e.K.
Wichernstrasse 18
66482 Zweibruecken

Registergericht
Amtsgericht Zweibruecken
HRA 1518

P: +49 6332 44040
F: +49 6332 899227
M: +49 170 5218548
M: +49 176 97497102

E: thomas.will at xinux.de
W: http://www.xinux.com