[strongSwan] Don't know where to start

[Rene Maurer]

Hello Noel

On 27.04.2017 15:12, Noel Kuntze wrote:

> On 27.04.2017 14:12, Rene Maurer wrote:

>> Unfortunately the problem is still pending.

> Obviously the remote peer does not respond to the request.

Finally I have the tunnel up.

ipsec status
Routed Connections:
        home{1}:  ROUTED, TUNNEL, reqid 1
        home{1}:   10.4.48.0/20 === 10.4.30.0/24 
Security Associations (1 up, 0 connecting):
        home[1]: ESTABLISHED 69 minutes ago, 192.168.252.20[CN=test at xxx.ch]...xxx.137.25.197[CN=xxx.137.25.195]
        home{3}:  INSTALLED, TUNNEL, reqid 1, ESP in UDP SPIs: c8110ee4_i 9108d951_o
        home{3}:   10.4.48.0/20 === 10.4.30.0/24

and ping from 10.4.48.5 (my site) to 10.4.30.11 (remote site) works.

Instead of GPRS I do now use a wired connection to go the Ethernet.

Seams, that the GPRS connection causes the troubles (I use the *same* device
in both cases, just switched from GPRS to Ethernet). I will start an extra
thread for that subject.

Thank you so much for helping!

Best regards
René