[strongSwan] leftsubnet and loopback problem

[John Brown]

2016-11-21 11:10 GMT+01:00 John Brown <jb20141125 at gmail.com>:

>
>
> 2016-11-21 11:03 GMT+01:00 Tobias Brunner <tobias at strongswan.org>:
>
>> Hi John,
>>
>> > ip address add dev lo 10.2.3.4/32
>> > ...
>> > Nov 17 10:56:43 127 daemon.info charon: 16[KNL] no local address found
>> in traffic selector 10.2.3.4/32
>> > ...
>> > I'm using: Linux strongSwan U4.5.2/K3.4.113
>>
>> That's really old.  Back then loopback interfaces were not considered.
>> You need at least 5.0.1 for that.
>>
>> Regards,
>> Tobias
>>
>> _______________________________________________
>> Users mailing list
>> Users at lists.strongswan.org
>> https://lists.strongswan.org/mailman/listinfo/users
>
>
>
Hi Tobias,
Sorry for previous empty message, sent by mistake.

Thank you for your answer.

I was just going to write here, that I've tested this on sswan 5.2.1 and it
works.

Regards,
John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20161121/25400f03/attachment.html>