[strongSwan] TLS handshake negotiation fail
noel at familie-kuntze.de
Sun Feb 28 20:44:53 CET 2016
Now you're just fishing in the dark and guessing.
The format of the certificate is irrelevant. Read the log you pasted and fix the
> Feb 25 14:41:13 tester charon: 05[TLS] server certificate does not match to 'C=ES, O=ACCV, CN=ACCVRAIZ1'
I guess that's from the client. Where did you set that DN?
On 28.02.2016 20:37, yukou katori wrote:
> Hi, Noel
> Or this "access denied" can come from pkcs format?
> pkcs#7 is used in this case, pkcs#12 should be used?
> On Sunday, 28 February 2016, 15:20, yukou katori <k10lie.tech at yahoo.co.uk> wrote:
> Hi, Noel
> I complied again to isolate this problem.
> The reason why no item about certificates was shown by "ipsec listall" came from that I imported incorrect certificate from FreeRadius.
> Now I could get the item about CA by "ipsec install".
> But I get the same error yet.
> What does "access denied" mean?
> This is for TLS 1.2 but, it means:
> A valid certificate was received, but when access control was
> applied, the sender decided not to proceed with negotiation. This
> message is always fatal.
> from rfc5246
> Access control?
> I complied like this:
> ./configure --prefix=/usr/local --sysconfdir=/usr/local/etc --enable-eap-identity --enable-eap-tls --enable-eap-peap --enable-eap-ttls --enable-eap-mschapv2 --enable-eap-md5
Mit freundlichen Grüßen/Kind Regards,
GPG Key ID: 0x63EC6658
Fingerprint: 23CA BB60 2146 05E7 7278 6592 3839 298F 63EC 6658
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 819 bytes
Desc: OpenPGP digital signature
More information about the Users