[strongSwan] How to use IPSec between two hosts using strongswan with IKEv2

[Andreas Steffen]

  Hi Priyaranjan,

the links I sent you should be fine as a guidance for your host-host
IPsec setup. If you run into any problems just send us the strongSwan
log files.

Regards

Andreas

On 19.05.2015 12:26, Priyaranjan Nayak wrote:
> Hi Andreas,
>
> I have two machine i.e 192.168.1.116 and 192.168.1.118 and wanted to
> setup the IPsec between these two machine. In my network one MODEM ,
> SWITCH  and two machine are there.For more clarification of network, I
> have attached the network diagram. I have tried the above link ,it's not
> working for me . Please suggest me to setup the IPsec for my
> network.Thanks for your quick reply.
>
> On Tue, May 19, 2015 at 1:38 PM, Andreas Steffen
> <andreas.steffen at strongswan.org <mailto:andreas.steffen at strongswan.org>>
> wrote:
>
>     Hi Priyaranjan,
>
>     here is an example for a host-host connection in IPsec tunnel mode:
>
>     http://www.strongswan.org/uml/testresults/ikev2/host2host-cert/
>
>     and here in IPsec transport mode:
>
>     http://www.strongswan.org/uml/testresults/ikev2/host2host-transport/
>
>     Regards
>
>     Andreas
>
>     POn 05/19/2015 09:47 AM, Priyaranjan Nayak wrote:
>      > Hi All,
>      >
>      > I wanted to use the strongswan with IKEv2 for IPsec between two
>     hosts.
>      > Could you please suggest me how can configure for two hosts ?
>      > Please suggest me if you have any other idea/link ?
>      >
>      >
>      > Thanks
>      > Priyaranjan
>
>     ======================================================================
>     Andreas Steffen andreas.steffen at strongswan.org
>     <mailto:andreas.steffen at strongswan.org>
>     strongSwan - the Open Source VPN Solution! www.strongswan.org
>     <http://www.strongswan.org>
>     Institute for Internet Technologies and Applications
>     University of Applied Sciences Rapperswil
>     CH-8640 Rapperswil (Switzerland)
>     ===========================================================[ITA-HSR]==
>
>
>
>
> --
> Thanks
> Priyaranjan

-- 
======================================================================
Andreas Steffen                         andreas.steffen at strongswan.org
strongSwan - the Open Source VPN Solution!          www.strongswan.org
Institute for Internet Technologies and Applications
University of Applied Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===========================================================[ITA-HSR]==

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4255 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.strongswan.org/pipermail/users/attachments/20150519/a96aa846/attachment.bin>