[strongSwan] net-net sample can not work on ubuntu14.04

yzhu1 Yanjun.Zhu at windriver.com
Thu May 7 08:37:22 CEST 2015

Hi, Bernhard

Follow your advice, I added this route.
But it does not work.

I want to know how you configure strongswan in "public IP on eth0". <=> hardware router xx.xx.xx.xx (public IP 
from provider) <=> Internet <=> public IP on eth0 <=> on eth1

how do you configure your strongswan? what is the version of strongswan? 
Do you enable tnc feature?

Would you like to share your configuration files? such as ipsec.conf, 

Thanks a lot.
Zhu Yanjun

On 05/06/2015 09:32 PM, Bernhard Marx wrote:
> Hi Alex,
> yes; I had a default gateway of in the network.
> strongswan server has a own separate ip...
> Yes I'm trying adding this route on the "primary" gateway, but it 
> looks like as it is a MS-TMG (Microsoft Forefront server) it not 
> really taking the route...
> 2015-05-06 15:05 GMT+02:00 Alex Zetaeffesse <fzetafs at gmail.com 
> <mailto:fzetafs at gmail.com>>:
>     On Wed, May 6, 2015 at 8:44 AM, Bernhard Marx
>     <bernhard.marx at gmail.com <mailto:bernhard.marx at gmail.com>> wrote:
>         Hi all,
>         for my issue I could resolve it with adding a routing rule to
>         all clients, because the VPN is not the default gateway for
> <> network...
>     Hi Berhnard,
>     my understanding is that you have two Internet lines, am I correct?
>     it should be possible to add a route on the real gateway to
>     redirect packets to the 2nd (VPN) gateway without intervening on
>     each client.
>     I knew it might be a routing problem,
>     Alex
> _______________________________________________
> Users mailing list
> Users at lists.strongswan.org
> https://lists.strongswan.org/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20150507/03de04c4/attachment.html>

More information about the Users mailing list