[strongSwan] net-net sample can not work on ubuntu14.04

[Bernhard Marx]

Dear Zhu,

I think I have the issue... as send a request to mail list yesterday...

Feedback I received is to check the routing of packets... but I cant
identify the issue...

Regards
Bernhard

2015-05-04 10:17 GMT+02:00 zhuyj <mounter625 at 163.com>:

> Hi, all
>
> I followed this link:
> http://www.strongswan.org/uml/testresults/ikev2/net2net-psk/
>
> I configured 4 vmare hosts. The hosts are ubuntu14.04.
>
> The network topology is as below.
>
> 10.1.0.10 <---->10.1.0.1 (moon) 192.168.0.1<----->192.168.0.2 (sun)
> 10.2.0.1<---->10.2.0.10
>
> strongswan is 5.1.2.
>
> From this link:
> http://www.strongswan.org/uml/testresults/ikev2/net2net-psk/, after a vpn
> tunnel is created,
> I ran "ping 10.2.0.10" on clinet 10.1.0.10. But I can not get any reply
> from 10.2.0.10.
>
> I can find the icmp packets into moon. But moon will not forward these
> icmp packets.
>
> I exactly followed this link
> http://www.strongswan.org/uml/testresults/ikev2/net2net-psk/, but I can
> not get
> the same test result with this link.
>
> Does any one have the similar experience?
>
> Any reply is appreciated.
>
> Thanks a lot.
> Zhu Yanjun
>
>
> _______________________________________________
> Users mailing list
> Users at lists.strongswan.org
> https://lists.strongswan.org/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20150504/8fa7a09e/attachment.html>