[strongSwan] Issue with load tester
Sunny2.Kumar at aricent.com
Mon Jun 15 10:49:02 CEST 2015
I am trying client-server eap-aka scenario. I am able to get the connection established for normal strongswan client and strongswan server.
Now when I am trying to the same strongswan server with load-tester client, then connection fails. In log file on load-tester client side I can see following prints :
Received MAC does not match with XMAC.
No MSK established.
Strongswan.conf that I have used on load-tester client is following:
enable = yes
initiators = 1
iterations = 1
delay = 1000
responder = 10.3.10.251
proposal = aes128-sha1-modp1024
initiator_auth = eap-aka
responder-auth = eap-aka
initiator_id = 0123456700000000 at wlan.mnc212.mcc091.3gppnetwork.org<mailto:0123456700000000 at wlan.mnc212.mcc091.3gppnetwork.org>
responder_id = moon.strongswan.org
request_virtual_ip = yes
ike_reky = 0
child_rekey = 0
delete_after_establishment = no
shutdown_when_complete = no
Please let me know if I am missing something.
Thanks in advance.
"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Users