[strongSwan] /etc/strongswan.d/VPN.conf:1: syntax error, unexpected NAME, expecting NEWLINE or '{' or '=' [vpn]

[Stephen Feyrer]

Apologies!!!


Thank you, Noel!



--
Kind regards

Stephen Feyrer.


On Fri, 17 Apr 2015 14:08:57 +0100, Stephen Feyrer  
<stephen.feyrer at btinternet.com> wrote:

> Hi Neol,
>
> Thank you.  I have removed the file /etc/strongswan.d/VPN.conf
>
> In /etc/ipsec.conf I have the same configuration.  At least there is  
> progress, unfortunately I am still baffled.  This is the previously  
> working configuration.
>
> code:
>
> # ipsec.conf - strongSwan IPsec configuration file
>
> # basic configuration
>
> config setup
>          # strictcrlpolicy=yes
>          # uniqueids = no
>
> conn VPN-OFFICE-COM
> keyexchange=ikev1
> type=transport
> authby=secret
> ike=3des-sha1-modp1024
> rekey=no
> left=%defaultroute
> leftprotoport=udp/l2tp
> right=vpn.office.com
> rightprotoport=udp/l2tp
> rightid=17.11.7.5
> auto=add
>
>
> Having restarted ipsec, I get the following result
>
> code:
>
> # ipsec up VPN-OFFICE-COM
> initiating Main Mode IKE_SA VPN-OFFICE-COM[1] to 17.11.7.5
> generating ID_PROT request 0 [ SA V V V V ]
> sending packet: from 1.2.3.4[500] to 17.11.7.5[500] (212 bytes)
> received packet: from 17.11.7.5[500] to 1.2.3.4[500] (116 bytes)
> parsed ID_PROT response 0 [ SA V V ]
> received draft-ietf-ipsec-nat-t-ike-02\n vendor ID
> received FRAGMENTATION vendor ID
> generating ID_PROT request 0 [ KE No NAT-D NAT-D ]
> sending packet: from 1.2.3.4[500] to 17.11.7.5[500] (244 bytes)
> received packet: from 17.11.7.5[500] to 1.2.3.4[500] (304 bytes)
> parsed ID_PROT response 0 [ KE No V V V V NAT-D NAT-D ]
> received Cisco Unity vendor ID
> received XAuth vendor ID
> received unknown vendor ID: [Available On Request]
> received unknown vendor ID: [Available On Request]
> local host is behind NAT, sending keep alives
> generating ID_PROT request 0 [ ID HASH N(INITIAL_CONTACT) ]
> sending packet: from 1.2.3.4[4500] to 17.11.7.5[4500] (84 bytes)
> received packet: from 17.11.7.5[4500] to 1.2.3.4[4500] (84 bytes)
> parsed ID_PROT response 0 [ ID HASH V ]
> received DPD vendor ID
> IKE_SA VPN-OFFICE-COM[1] established between  
> 1.2.3.4[1.2.3.4]...17.11.7.5[17.11.7.5]
> generating QUICK_MODE request [Available On Request] [ HASH SA No ID ID  
> NAT-OA NAT-OA ]
> sending packet: from 1.2.3.4[4500] to 17.11.7.5[4500] (220 bytes)
> received packet: from 17.11.7.5[4500] to 1.2.3.4[4500] (180 bytes)
> parsed QUICK_MODE response [Available On Request] [ HASH SA No ID ID  
> N((24576)) NAT-OA ]
> received 28800s lifetime, configured 0s
> no acceptable traffic selectors found
> establishing connection 'VPN-OFFICE-COM' failed
>
>
>


-- 
Kind regards


Stephen Feyrer