[strongSwan] received retransmit of response with ID 0, but next request already sent

[Thomas Egerer]

Hello Axel,


On 10/22/2014 02:19 PM, Axel Zöllich wrote:
> Am Mittwoch, 22. Oktober 2014, 13:48:05 schrieb Thomas Egerer:
> 
>> Any chance you can provide the log information of the peer?
> No :(
I thought so ;)


>> Judging from your config, you are using public key
>> authentication. Do you see the certificates being transmitted?
> Yes, i do:
Maybe it's me, but I don't see them beeing transmitted. According
to [1], they must be transmitted in the third exchange. Yours
however is rather short for it to contain a certificate.
Try adding the option 'leftsendcert = always' unless you have
already preplaced your initiators certificate on the remote device.

Another thought: have you tried searching the wiki ([2]) for any
hints on how to configure strongswan to work with your remote
device?

Cheers,
Thomas


[1] http://tools.ietf.org/html/rfc2409#section-5.1
[2] https://wiki.strongswan.org/projects/strongswan/wiki