[strongSwan] Proposal Logging
bwats9999 at gmail.com
Fri Oct 17 00:24:33 CEST 2014
That did it. Thanks!
On Thu, Oct 16, 2014 at 11:37 AM, Andreas Steffen <
andreas.steffen at strongswan.org> wrote:
> Hi Brian,
> the following line in ipsec.conf
> charondebug="cfg 2"
> should do the job as the following example scenario shows:
> Oct 6 19:46:41 moon charon:
> 04[CFG] received proposals:
> 04[CFG] configured proposals:
> 04[CFG] selected proposal:
> Best regards
> On 10/16/2014 05:31 PM, Brian Watson wrote:
> > Hi,
> > I want to debug the following problem:
> > 1. ipsec.conf has esp=aes256
> > 2. I try to establish a VPN connection initiated by my handset and
> > StrongSwan responds with No Proposal Chosen
> > 3. I would like to see what the problem is by seeing what the proposals
> > 4. I set cfg, mgr, ike,esp,knl, etc to be equal to 4 in strongswan.conf
> > for filelog in order to get more detailed information from the logs, but
> > it still doesn't show the proposals.
> > Any ideas as to what I might be doing wrong?
> > Thanks,
> > Brian
> Andreas Steffen andreas.steffen at strongswan.org
> strongSwan - the Open Source VPN Solution! www.strongswan.org
> Institute for Internet Technologies and Applications
> University of Applied Sciences Rapperswil
> CH-8640 Rapperswil (Switzerland)
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Users