[strongSwan] IPv6 IKEv2 Road Warrior Part 2

[Randy Wyatt]

Martin,

  Thank you for all of your help.  It seems Windows 7 Agile VPN Client has
some rather serious issues.  After switching clients,  I successfully
established a tunnel today (after some other configuration mishaps).

Regards,
Randy

On Thu, Oct 9, 2014 at 6:12 AM, Martin Willi <martin at strongswan.org> wrote:

> Randy,
>
> > 14[ENC] generating IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP)
> N(NATD_D_IP) N(MULT_AUTH) ]
> > 14[NET] sending packet: from serveripv6v1[500] to clientipv61[500] (312
> bytes)
> > 15[JOB] deleting half open IKE_SA after timeout
>
> After sending the IKE_SA_INIT response message, the gateway does not
> receive the next IKE_AUTH message from the client. Most likely that
> message gets lost on your path, but you may check that with a network
> sniffer on the client. Possible causes for IKE_AUTH losses are either
> fragmentation or firewalling issues on your path.
>
> Regards
> Martin
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20141009/2d17fe48/attachment.html>