[strongSwan] How to limit bandwidth of each connection?

[J.Witvliet at mindef.nl]

See: http://www.lartc.org/
Remember you can only shape the outgoing stream, so you might have to use "tc" on both ends...

hw

From: users-bounces at lists.strongswan.org [mailto:users-bounces at lists.strongswan.org] On Behalf Of Pawel Grzesik
Sent: woensdag 26 maart 2014 11:22
To: rong889
Cc: users at lists.strongswan.org
Subject: Re: [strongSwan] How to limit bandwidth of each connection?

Try iptables and tc.

Thanks,
pawel

On 26 Mar 2014, at 10:09, rong889 <rong889 at gmail.com<mailto:rong889 at gmail.com>> wrote:



Hi,
    I want to limit bandwidth of each connection, does StrongSwan have build in support? If not, is there any solution? Thanks.
_______________________________________________
Users mailing list
Users at lists.strongswan.org<mailto:Users at lists.strongswan.org>
https://lists.strongswan.org/mailman/listinfo/users

______________________________________________________________________
Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De Staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het electronisch verzenden van berichten.

This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The State accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20140326/c3fda5d6/attachment.html>