[strongSwan] strongswan without client certifikate
Imran Akbar
skunkwerk at gmail.com
Sat Dec 6 17:22:18 CET 2014
Of course :)
working config:
server: http://pastebin.com/U3V88tPN
client: http://pastebin.com/WMisNGet
not working config with no BYOD libraries:
server: http://pastebin.com/AAfKaiQC
client: http://pastebin.com/4QfWVs84
yours,
imran
On Sat, Dec 6, 2014 at 8:01 AM, Noel Kuntze <noel at familie-kuntze.de> wrote:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA256
>
> Hello Imran,
>
> Please send logs of the client and server side.
>
> Mit freundlichen Grüßen/Regards,
> Noel Kuntze
>
> GPG Key ID: 0x63EC6658
> Fingerprint: 23CA BB60 2146 05E7 7278 6592 3839 298F 63EC 6658
>
> Am 06.12.2014 um 17:02 schrieb Imran Akbar:
> > Hey Noel,
> > I understand the security implications, as mentioned here:
> https://bluebox.com/technical/questioning-the-chain-of-trust-investigations-into-the-root-certificates-on-mobile-devices/
> > But I have no other way to get this working for clients without asking
> them to run through a long installation process.
> >
> > I now have it working, but when I disable BYOD (no libtncss, libtncnif,
> or libimcv) in the Android client, it no longer works.
> > Any ideas? I see the messages:
> > 12-06 15:19:41.844 2184-2308/ I/charon﹕ 06[ENC] proposal number
> smaller than previous
> > 12-06 15:19:41.844 2184-2308/ I/charon﹕ 06[ENC] SECURITY_ASSOCIATION
> payload verification failed
> > 12-06 15:19:41.844 2184-2308/ I/charon﹕ 06[IKE] message verification
> failed
> > on the server
> > and on the client, it seems to be stuck generating IKE_SA_INIT instead
> of IKE_AUTH requests.
> >
> > Are those libraries required?
> >
> > regards,
> > imran
> >
> > On Fri, Dec 5, 2014 at 11:44 AM, Noel Kuntze <noel at familie-kuntze.de
> <mailto:noel at familie-kuntze.de>> wrote:
> >
> >
> > Hello Imran,
> >
> > Using a trusted root CA would mean, that you have to trust a third party
> with access to your gateway.
> > An attacker could very well be in the network path between the client
> and the gateway, hence you need
> > to make sure he can't get a valid certificate. Trust between the client
> and the gateway is created over ...
> > 1) the CN of the DN of the certificate it presents that matches the name
> the client tries to connect to
> > 2) any SAN value in the certificate that matches the name the client
> tries to connect to
> > 3) the signature of a trusted third party on the certificate
> >
> > Controlling access to the trusted third party's certficate means
> controlling which certificates get
> > issued. By using another company to issue your server certificate, you
> trust them to keep you safe.
> >
> > Sadly, the CA system has proven to be somewhat untrustworthy, as a lot
> of hacks of CAs showed.
> >
> >
> > Mit freundlichen Grüßen/Regards,
> > Noel Kuntze
> >
> > GPG Key ID: 0x63EC6658
> > Fingerprint: 23CA BB60 2146 05E7 7278 6592 3839 298F 63EC 6658
> >
> > Am 05.12.2014 um 20:39 schrieb Imran Akbar:
> > > Hey Noel,
> >
> > > Do you mean using a trusted root CA certificate on Android will allow
> a MITM attack if someone tries to impersonate our gateway? But if we
> restrict clients to only connect to our gateway - and not others signed by
> the same CA, would that still be an issue?
> > > The VPN itself doesn't have access to any protected resources - which
> is why I'm not worried about the lack of a PIN code on devices. It's ease
> of use that I'm aiming for.
> >
> > > yours,
> > > imran
> >
> > > On Fri, Dec 5, 2014 at 11:15 AM, Noel Kuntze <noel at familie-kuntze.de
> <mailto:noel at familie-kuntze.de> <mailto:noel at familie-kuntze.de <mailto:
> noel at familie-kuntze.de>>> wrote:
> >
> >
> > > Hello Imran,
> >
> > > I strongly recommend NOT doing that, as the clients would then trust
> any server with a certificate of the CA
> > > and try to authenticate against them with their credentials, which may
> expose them to attackers.
> > > Also, you should really advise your clients to set up pin code
> authentication to their phone's home screen, as
> > > an individual getting their hands on on a client's phone would get
> access to the VPN, if the phone wasn't locked with a code.
> >
> > > You might want to use a p12 file then to make this easier. See this
> website [1] for an example command to create one.
> > > The clients can get it sent by email and they just need to open it and
> accept the certificates.
> > > I'm sorry for the last email. It seems I experienced a bug with
> enigmail on Thunderbird.
> >
> > > [1]
> https://wiki.strongswan.org/projects/strongswan/wiki/IOS_(Apple)#PKCS12-file
> >
> > > Mit freundlichen Grüßen/Regards,
> > > Noel Kuntze
> >
> > > GPG Key ID: 0x63EC6658
> > > Fingerprint: 23CA BB60 2146 05E7 7278 6592 3839 298F 63EC 6658
> >
> > > Am 05.12.2014 um 19:53 schrieb Imran Akbar:
> > > > Hey Noel,
> >
> > > > thanks for your continued help.
> > > > I generated a self-signed CA on my server and put it into the
> correct directories.
> >
> > > > While I can (and have previously) installed the CA certificate
> myself on the Android client, I don't want the other users who aren't as
> tech-savvy to have to do this step. It also requires them to set up a PIN
> code for their phone's home screen, which not everyone wants to have to do.
> >
> > > > If I used a paid, non-self-signed CA certificate that's tied back to
> one of the root certificates already installed on Android, would that solve
> this issue?
> >
> > > > regards,
> > > > imran
> >
> >
> >
> >
> >
> > > > On Fri, Dec 5, 2014 at 10:19 AM, Noel Kuntze <noel at familie-kuntze.de
> <mailto:noel at familie-kuntze.de> <mailto:noel at familie-kuntze.de <mailto:
> noel at familie-kuntze.de>> <mailto:noel at familie-kuntze.de <mailto:
> noel at familie-kuntze.de> <mailto:noel at familie-kuntze.de <mailto:
> noel at familie-kuntze.de>>>> wrote:
> >
> >
> > > > Hello Imran,
> >
> > > > Do you have a CA? You need to have your CA installed on all devices.
> >
> > > > Try adding the DNS name you're connecting to in an additional SAN
> field by adding --san DNSNAME to
> > > > the ipsec pki command used to generate the server certificate.
> >
> > > > Mit freundlichen Grüßen/Regards,
> > > > Noel Kuntze
> >
> > > > GPG Key ID: 0x63EC6658
> > > > Fingerprint: 23CA BB60 2146 05E7 7278 6592 3839 298F 63EC 6658
> >
> > > > Am 05.12.2014 um 19:16 schrieb Imran Akbar:
> > > > > I've gotten past that issue by ensuring I was using the IP when
> generating the certificates, as in:
> > > > >
> http://endlessroad1991.blogspot.com/2014/04/setup-ipsec-vpn-on-ec2.html
> >
> > > > > but now the client cannot verify the server with the message
> "verifying gateway authentication failed"
> > > > > and in the client log:
> > > > > "no trusted RSA public key found for 'C=CN, O=strongSwan,
> CN=54.169.64.53'"
> >
> > > > > How can I verify the server without installing its public key on
> every client, or using a PSK (which the Android client doesn't support)?
> >
> > > > > thanks,
> > > > > imran
> >
> > > > > On Fri, Dec 5, 2014 at 9:04 AM, Imran Akbar <skunkwerk at gmail.com
> <mailto:skunkwerk at gmail.com> <mailto:skunkwerk at gmail.com <mailto:
> skunkwerk at gmail.com>> <mailto:skunkwerk at gmail.com <mailto:
> skunkwerk at gmail.com> <mailto:skunkwerk at gmail.com <mailto:
> skunkwerk at gmail.com>>> <mailto:skunkwerk at gmail.com <mailto:
> skunkwerk at gmail.com> <mailto:skunkwerk at gmail.com <mailto:
> skunkwerk at gmail.com>> <mailto:skunkwerk at gmail.com <mailto:
> skunkwerk at gmail.com> <mailto:skunkwerk at gmail.com <mailto:
> skunkwerk at gmail.com>>>>> wrote:
> >
> > > > > When I change the ipsec.conf from:
> > > > > rightauth=psk
> > > > > righauth2=eap-mschapv2
> >
> > > > > to:
> > > > > rightauth=eap-mschapv2
> >
> > > > > the server log now contains:
> > > > > Dec 5 16:46:34 ip-172-31-26-153 charon: 14[CFG] looking for
> peer configs matching 172.31.26.153[%any]...172.56.39.247[app]
> > > > > Dec 5 16:46:34 ip-172-31-26-153 charon: 14[CFG] selected peer
> config 'android'
> > > > > Dec 5 16:46:34 ip-172-31-26-153 charon: 14[IKE] initiating
> EAP_IDENTITY method (id 0x00)
> > > > > Dec 5 16:46:34 ip-172-31-26-153 charon: 14[IKE] received
> ESP_TFC_PADDING_NOT_SUPPORTED, not using ESPv3 TFC padding
> > > > > Dec 5 16:46:34 ip-172-31-26-153 charon: 14[IKE] peer supports
> MOBIKE
> > > > > Dec 5 16:46:34 ip-172-31-26-153 charon: 14[CFG] no IDr
> configured, fall back on IP address
> > > > > Dec 5 16:46:34 ip-172-31-26-153 charon: 14[IKE]
> authentication of '172.31.26.153' (myself) with pre-shared key
> > > > > Dec 5 16:46:34 ip-172-31-26-153 charon: 14[ENC] generating
> IKE_AUTH response 1 [ IDr AUTH EAP/REQ/ID ]
> > > > > Dec 5 16:46:34 ip-172-31-26-153 charon: 14[NET] sending
> packet: from 172.31.26.153[4500] to 172.56.39.247[63277] (124 bytes)
> > > > > Dec 5 16:46:34 ip-172-31-26-153 charon: 15[NET] received
> packet: from 172.56.39.247[63277] to 172.31.26.153[4500] (76 bytes)
> > > > > Dec 5 16:46:34 ip-172-31-26-153 charon: 15[ENC] parsed
> INFORMATIONAL request 2 [ N(AUTH_FAILED) ]
> >
> > > > > and I get a different error message in the client log:
> > > > > no shared key found for 'app'
> >
> > > > > As I was never prompted for the PSK in the app, I'm guessing
> the Android client doesn't support it?
> > > > > Therefore, the only way to get this working is for the server
> to authenticate with a certificate, it seems.
> > > > > Which isn't working, as it's not parsing my private key
> properly.
> >
> > > > > thanks,
> > > > > imran
> >
> > > > > On Fri, Dec 5, 2014 at 8:41 AM, Imran Akbar <
> skunkwerk at gmail.com <mailto:skunkwerk at gmail.com> <mailto:
> skunkwerk at gmail.com <mailto:skunkwerk at gmail.com>> <mailto:
> skunkwerk at gmail.com <mailto:skunkwerk at gmail.com> <mailto:
> skunkwerk at gmail.com <mailto:skunkwerk at gmail.com>>> <mailto:
> skunkwerk at gmail.com <mailto:skunkwerk at gmail.com> <mailto:
> skunkwerk at gmail.com <mailto:skunkwerk at gmail.com>> <mailto:
> skunkwerk at gmail.com <mailto:skunkwerk at gmail.com> <mailto:
> skunkwerk at gmail.com <mailto:skunkwerk at gmail.com>>>>> wrote:
> >
> > > > > Hey Thomas,
> >
> > > > > Here's my latest attempt to get a setup working without
> requiring client certificates.
> >
> > > > > Client is Strongswan Android, server is running Strongswan
> 5.2.2 on a fresh Ubuntu 14 server on EC2 with UDP ports 500 and 4500 opened.
> > > > > Client is connecting via IKEv2 username/password.
> >
> > > > > Is PSK the same as the "EAP username/password" option in
> the Strongswan android client? I have a feeling it's not, ie this config
> will not work for EAP-MSCHAPv2:
> http://www.strongswan.org/uml/testresults/ikev2/rw-psk-ipv4/
> >
> > > > > But there's no documentation on a version of this one
> without the gateway authenticating via a RSA key:
> > > > >
> http://www.strongswan.org/uml/testresults/ikev2/rw-eap-mschapv2-id-rsa/
> >
> > > > > I've tried with the gateway authenticating itself using a
> certificate, and with PSK - both have the same error:
> > > > > *"peer requested EAP, config inacceptable"*
> >
> > > > > In addition, the gateway seems unable to parse my private
> server key:
> > > > > *building CRED_PRIVATE_KEY - RSA failed*, tried 5 builders
> > > > > Dec 5 16:15:13 ip-172-31-26-153 charon: 00[CFG] loading
> private key from '/etc/ipsec.d/private/serverKey.pem' failed
> > > > > even though I see openssl, pkcs1, and pem in my plugins -
> though I'm not sure which ones weren't loaded, as it doesn't say in the log.
> >
> > > > > attempt 1 - with gateway using public key:
> > > > > ipsec.conf: https://pastee.org/z8234
> > > > > ipsec.secrets: https://pastee.org/mva6t
> > > > > server log: https://pastee.org/t2ahc
> >
> > > > > attempt 2 - with gateway using PSK:
> > > > > ipsec.conf: https://pastee.org/f4fbp
> > > > > ipsec.secrets: https://pastee.org/mva6t
> > > > > server log: https://pastee.org/6yd8q
> >
> > > > > Can someone please help?
> >
> > > > > thanks,
> > > > > imran
> >
> > > > > On Thu, Dec 4, 2014 at 3:21 AM, Thomas <jk at c.vu <mailto:
> jk at c.vu <mailto:jk at c.vu> <mailto:jk at c.vu <mailto:jk at c.vu>> <mailto:jk at c.vu
> <mailto:jk at c.vu> <mailto:jk at c.vu <mailto:jk at c.vu>>>>> wrote:
> >
> > > > > Hi,
> >
> > > > > ok, so I have to change my EAP-MSCHAPv2 configuration.
> > > > > I've tested a lot, but don't find any
> ipsec-configuration where the
> > > > > client don't need the certificate installed local.
> >
> > > > > Do you have any ideas based on my posted ipsec.conf ?
> >
> > > > > Best regards
> > > > > Thomas
> >
> > > > > Am 04.12.2014 10:40, schrieb Martin Willi:
> > > > > > Hi,
> > > > > >
> > > > > >> Any idea whats the best authentication method for
> username/password only
> > > > > >> on client-side? EAP-MD5?
> > > > > >> The client should be able to connect via windows
> ikev2 native clients,
> > > > > >> the strongswan android-app,
> > > > > > If you want to use the native Windows IKEv2 Agile
> VPN client, there is
> > > > > > no way around EAP-MSCHAPv2 for username/password
> authentication. You
> > > > > > could wrap that in PEAP/TTLS, but that most likely
> makes no sense for
> > > > > > your setup. The Android App supports EAP-MSCHAPv2 as
> well. Refer to [1]
> > > > > > for configuration details.
> > > > > >
> > > > > >> and the native clients from osx/ios.
> > > > > > OS X does not natively support IKEv2. You'd have to
> stick to IKEv1 with
> > > > > > XAuth, so you need a separate configuration profile.
> Please note that
> > > > > > there are rekeying issues with that client, which
> usually breaks the
> > > > > > tunnel after ~45 minutes if you rely on
> username/passwords. Refer to [2]
> > > > > > for configuration details.
> > > > > >
> > > > > > iOS supports IKEv2 since version 8, older versions
> support IKEv1 only.
> > > > > > Refer to [3] for details about deploying
> configuration profiles.
> > > > > >
> > > > > > Regards
> > > > > > Martin
> > > > > >
> > > > > > [1]
> https://wiki.strongswan.org/projects/strongswan/wiki/Windows7#C-Authentication-using-EAP-MSCHAP-v2
> > > > > > [2]
> https://wiki.strongswan.org/projects/strongswan/wiki/IOS_(Apple)
> > > > > > [3]
> https://wiki.strongswan.org/projects/strongswan/wiki/AppleIKEv2Profile
> > > > > >
> > > > > >
> >
> > > > > _______________________________________________
> > > > > Users mailing list
> > > > > Users at lists.strongswan.org <mailto:
> Users at lists.strongswan.org> <mailto:Users at lists.strongswan.org <mailto:
> Users at lists.strongswan.org>> <mailto:Users at lists.strongswan.org <mailto:
> Users at lists.strongswan.org> <mailto:Users at lists.strongswan.org <mailto:
> Users at lists.strongswan.org>>> <mailto:Users at lists.strongswan.org <mailto:
> Users at lists.strongswan.org> <mailto:Users at lists.strongswan.org <mailto:
> Users at lists.strongswan.org>> <mailto:Users at lists.strongswan.org <mailto:
> Users at lists.strongswan.org> <mailto:Users at lists.strongswan.org <mailto:
> Users at lists.strongswan.org>>>>
> > > > > https://lists.strongswan.org/mailman/listinfo/users
> >
> >
> >
> >
> >
> >
> > > > > _______________________________________________
> > > > > Users mailing list
> > > > > Users at lists.strongswan.org <mailto:Users at lists.strongswan.org>
> <mailto:Users at lists.strongswan.org <mailto:Users at lists.strongswan.org>>
> <mailto:Users at lists.strongswan.org <mailto:Users at lists.strongswan.org>
> <mailto:Users at lists.strongswan.org <mailto:Users at lists.strongswan.org>>>
> > > > > https://lists.strongswan.org/mailman/listinfo/users
> >
> >
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users at lists.strongswan.org <mailto:Users at lists.strongswan.org>
> <mailto:Users at lists.strongswan.org <mailto:Users at lists.strongswan.org>>
> <mailto:Users at lists.strongswan.org <mailto:Users at lists.strongswan.org>
> <mailto:Users at lists.strongswan.org <mailto:Users at lists.strongswan.org>>>
> > > > https://lists.strongswan.org/mailman/listinfo/users
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2
>
> iQIcBAEBCAAGBQJUgyhnAAoJEDg5KY9j7GZYyaEQAJP+esP8Dbu/37T9mokgfErx
> UcltpW5NBT8zjtqcYP4U4S/cubgh7P7EObNWSdwSla6vwyuWJjhPll2YSPc6vohp
> uIoIdVpxOT9+lV+gClVlwhr1laP2eYSSe5cVWAvO70dlmeq4gpgvY4aVOicXHp1h
> pMWbhGyYYVINLz2cWTevavbD3UWKMDwlvb+foXHPb8T1nU6h1OK6oQvGJhvBKsw8
> WdcWi1JJycjvnqDKyn3gAO+q2vFYoKSYlBxXg5/zdtpo7vXx6JNnmRUGfT/A5+0O
> CvBE1GmYYQ2egeq7AjwrmKukZxHDG/xn6ksTK51i7IUmVYtjDuw+qtxVA8+GC0iu
> lDwfp2YaDSru1FwCIbEAhDDKU+JXVMahrH8R0llemJ9t9QngcVk7emRZqB8vY9D6
> 3FrD96Wgpi9GEa4lVHiMaSZ+ZfiK5bfxt8d4rVy2N9hBZCSPYLt7tXeFRElF6Kaz
> xpsVYwsTiSbci0ZVNWIi8FUxxJDVrtEEEOtyFPyxugyfiD6Aqg/b0MYPlIyzlImc
> 2Y26qC1TQGjRQ804aBpli3WCuwtZ9zbzZ9eT8BQJMdut05hBVKujWmh7lMUHwdTS
> ucPkvxYcncGkEl17MiP/dV2to0QySB+jNsHz03zAIYdQWNvq7HAfoEYgO+cKbuTO
> zydIVIIrlf7CbMLGw2Pr
> =q/jR
> -----END PGP SIGNATURE-----
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20141206/3fb807c6/attachment-0001.html>
More information about the Users
mailing list