[strongSwan] https website problem

[steven liu]

YES. IT WORKS after using -A FORWARD! Thanks a lot.

On Fri, Jan 18, 2013 at 6:35 PM, steven liu <stevenliu88 at gmail.com> wrote:

> Thanks. We already tried to set TCP MSS to 1300 by following commands. But
> we still has the same problem.
>
> iptables -t mangle -A POSTROUTING -p tcp --tcp-flags SYN,RST SYN -o eth0
> -j TCPMSS --set-mss 1300
>
>
> iptables -t mangle -A POSTROUTING -p tcp --tcp-flags SYN,RST SYN -o eth0
> -j TCPMSS --clamp-mss-to-pmtu
> *
> *
> On Fri, Jan 18, 2013 at 12:09 PM, steven liu <stevenliu88 at gmail.com>wrote:
>
>> Dear All,
>>
>> We have set up an ipsec vpn tunnel between an iphone and a strongswan vpn
>> server by following the strong wiki guide. It works if we use iphone to
>> access http website. But iphone cannot access any https website. We also
>> use wireshark to capture packets in the strongswan vpn server. It shows
>> some "TLS Encrypted Alert" packets. Any help much appreciated!
>>
>> Tks.
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20130119/56ce441d/attachment.html>