[strongSwan] Indirect Subnet Routing Question
tccheung1 at gmail.com
Thu Jun 21 07:54:38 CEST 2012
I am trying to configure a route to a subnet, but couldn't figured out how.
Here is my setup:
Host A on subnet A (169.254.1.0) with ip address 169.254.1.1.
Host B on subnet B (169.254.2.0) with ip address 169.254.2.1.
Strongswan is running on both Host A and B and have IPsec tunnel
between subnet A and subnet B.
Host C is on subnet B with ip address 169.254.2.10. I can ping from
Host A to Host C.
Host C is also on another subnet C (169.254.3.0) with ip address 169.254.3.1.
Host C would not have strongswan. And Host D is on same subnet C with
ip address 169.254.3.2.
Is there a way to set up a route such that we can ping from Host A to
Host D? For example, to
install a route on host A that says to get to the 169.254.3.0 net by
going thru 169.254.2.10. Linux
routing does not know about 169.254.2.10.
More information about the Users