[strongSwan] Simple? PSK Setup

[Chris Arnold]

Anyone?

Sent from my iPhone

On Jun 1, 2012, at 8:20 PM, Chris Arnold <carnold at electrichendrix.com> wrote:

> Been trying to get a simple PSK setup with strongSwan 4.3. Setup is below:
> # plutodebug=all
>>     crlcheckinterval=600
>>     strictcrlpolicy=no
>>   # cachecrls=yes
>>     nat_traversal=yes
>>   # charonstart=no
>>     plutostart=no
>> 
>> # Add connections here.
>> 
>> conn %default
>>   ikelifetime=28800s
>>   keylife=20m
>>   rekeymargin=3m
>>   keyingtries=1
>>   authby=secret
>>   keyexchange=ikev2
>>   mobike=no
>> 
>> conn rclients
>>   left=%defaultroute
>>   #leftcert=ChrisACert.pem
>>   #leftid=
>>   leftsubnet=192.168.1.0/24
>>   right=%any
>>   #rightsourceip=192.168.1.0/24
>>   auto=add
>> 
>> conn teknerds
>>   left=%defaultroute
>>   leftcert=moonCert.pem
>>   leftsubnet=192.168.1.0/24
>>   #leftid="dn name"
>>   #leftfirewall=yes
>>   right=moon public ip
>>   rightsubnet=192.168.123.0/24
>>   rightcert=sunCert.pem
>>   rightid="sun dn"
>>   auto=add
> I have followed http://wiki.strongswan.org/projects/strongswan/wiki/WindowsVista after not being able to configure a successful connection in windows 7 using the agile vpn client. Nothing shows up in the gateway logs and i have ike = 2, knl = 3 and net = 3 in strongswan.conf for logging. I have brought down the other tunnel and restarted ipsec. I have disconnected from our network and connected to a "open" wireless network and attempted to connect, same issue.
> 
> Can anyone help me get this working? I am willing to pay.
> 
> _______________________________________________
> Users mailing list
> Users at lists.strongswan.org
> https://lists.strongswan.org/mailman/listinfo/users