[strongSwan] Strongswan and Second Authentication

[Andreas Steffen]

Hi Terry,

we have a single example for multiple authentication:

http://www.strongswan.org/uml/testresults/ikev2/mult-auth-rsa-eap-sim-id/

And here is the nearly equal scenario with a single round of authentication

http://www.strongswan.org/uml/testresults/ikev2/rw-eap-sim-only-radius/

Kind regards

Andreas

On 06/02/2012 12:41 AM, T Cheung wrote:
> Hi,
> 
> I've been trying to configure second authentication.  Somehow I wasn't able
> to find any example of it, even though ipsec.conf instructions contain bits
> and pieces on this.
> 
> As far as I can understand so far, I think the only relevent info is in the conn
> section of ipsec.conf, and an extra key file in ipsec.secrets.  Here are the
> additional info I added to conn section:
> 
> --leftcert2
> --rightcert2
> --rightid2
> --rightauth2
> 
> Is there anything else?  It will be most helpful if there is a working example
> without second authentication, and a similar one with second authentication.
> 
> Thanks,
> Terry

======================================================================
Andreas Steffen                         andreas.steffen at strongswan.org
strongSwan - the Linux VPN Solution!                www.strongswan.org
Institute for Internet Technologies and Applications
University of Applied Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===========================================================[ITA-HSR]==