[strongSwan] Trying a basic peer to peer ipsec

[Shilpa Shree]

Hi I m new to ipsec tunnel .... Current we are establishing ipsec tunnel between two linux machines using strongswan open source

Here are config file : alice

# ipsec.conf - strongSwan IPsec configuration file

config setup
          crlcheckinterval=600
          strictcrlpolicy=no
          plutostart=no

conn %default
        ikelifetime=60m
        keylife=20m
        rekeymargin=3m
        keyingtries=1
        keyexchange=ikev2

conn host-host
          left=107.108.204.246
          right=107.108.204.245
          leftcert=aliceCert.pem
          rightid="C=CH, O=Linux strongSwan, CN=venus.strongswan.org"
      auto=add


and same on other side

# ipsec.conf - strongSwan IPsec configuration file

config setup
          crlcheckinterval=600
          strictcrlpolicy=no
          plutostart=no

conn %default
        ikelifetime=60m
        keylife=20m
        rekeymargin=3m
        keyingtries=1
        keyexchange=ikev2

conn host-host
          left=107.108.204.245
          right=107.108.204.246
          leftcert=venusCert.pem
          rightid="C=CH, O=Linux strongSwan, CN=alice.strongswan.org"
          leftfirewall=yes
          auto=add

and log when I run

/usr/sbin/ipsec statusall
Status of IKEv2 charon daemon (strongSwan 4.5.3):
  uptime: 10 seconds, since Sep 19 16:37:53 2011
  malloc: sbrk 135168, mmap 0, used 82288, free 52880
  worker threads: 9 of 16 idle, 6/1/0/0 working, job queue: 0/0/0/0, scheduled: 1
  loaded plugins: aes des sha1 sha2 md5 random x509 revocation constraints pubkey pkcs1 pgp pem fips-prf gmp xcbc hmac attr kernel-netlink resolve socket-default stroke updown eap-aka
Listening IP addresses:
  107.108.204.246
  2011::14
  107.108.204.246
Connections:
   host-host:  107.108.204.246...107.108.204.245
   host-host:   local:  [C=CH, O=Linux strongSwan, OU=Sales, CN=alice at strongswan.org] uses public key authentication
   host-host:    cert:  "C=CH, O=Linux strongSwan, OU=Sales, CN=alice at strongswan.org"
   host-host:   remote: [C=CH, O=Linux strongSwan, CN=venus.strongswan.org] uses any authentication
   host-host:   child:  dynamic === dynamic TUNNEL
Security Associations (1 up, 0 connecting):
   host-host[1]: CONNECTING, 107.108.204.246[%any]...107.108.204.245[%any]
   host-host[1]: IKE SPIs: c6d28a10188c9f00_i* 0000000000000000_r
   host-host[1]: Tasks active: IKE_VENDOR IKE_INIT IKE_NATD IKE_CERT_PRE IKE_AUTHENTICATE IKE_CERT_POST IKE_CONFIG CHILD_CREATE IKE_AUTH_LIFETIME IKE_MOBIKE

*********************************
/usr/sbin/ipsec up host-host
retransmit 4 of request with message ID 0
sending packet: from 107.108.204.246[500] to 107.108.204.245[500]
retransmit 5 of request with message ID 0
sending packet: from 107.108.204.246[500] to 107.108.204.245[500]


I m not getting where the error has occurred and why it is unable to establish connection ..kindly do help me in this regard... hoping any response

Thanks and regards,
Shilpa


________________________________
The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. L&T Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail"

______________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20110919/f934bc5b/attachment.html>