[strongSwan] Strongswan+RADIUS secret code problem?

[Andreas Steffen]

Hello,

did you enable EAP Identity?

   ./configure ... --enable-eap-identity

Regards

Andreas

On 10/28/2011 06:37 AM, T Z wrote:
> Hi all,
>
> I'm using Strongswan 4.5.2 (from Debian squeeze-backports) and
> Freeradius 2.1.0 (from Debian stable) to construct an IKEv2 VPN for my
> clients. It seems that Strongswan is connected with Freeradius, but
> client connection just fails. Testing with Windows 7 IKEv2 client, it
> prompts "Error 13801: IKE authentication credentials are unacceptable."
>
> Here's the log:
>
> /var/log/syslog:
> Oct 28 13:31:06 vpn charon: 08[NET] received packet: from
> client.ip.address[500] to server.ip.address[500]
> Oct 28 13:31:06 vpn charon: 08[ENC] parsed IKE_SA_INIT request 0 [ SA KE
> No N(NATD_S_IP) N(NATD_D_IP) ]
> Oct 28 13:31:06 vpn charon: 08[IKE] client.ip.address is initiating an
> IKE_SA
> Oct 28 13:31:06 vpn charon: 08[IKE] remote host is behind NAT
> Oct 28 13:31:06 vpn charon: 08[IKE] sending cert request for "C=CH,
> O=TonyVPN, CN=TonyVPN CA"
> Oct 28 13:31:06 vpn charon: 08[ENC] generating IKE_SA_INIT response 0 [
> SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(MULT_AUTH) ]
> Oct 28 13:31:06 vpn charon: 08[NET] sending packet: from
> server.ip.address[500] to client.ip.address[500]
> Oct 28 13:31:07 vpn charon: 10[NET] received packet: from
> client.ip.address[4500] to server.ip.address[4500]
> Oct 28 13:31:07 vpn charon: 10[ENC] unknown attribute type
> INTERNAL_IP4_SERVER
> Oct 28 13:31:07 vpn charon: 10[ENC] unknown attribute type
> INTERNAL_IP6_SERVER
> Oct 28 13:31:07 vpn charon: 10[ENC] parsed IKE_AUTH request 1 [ IDi
> CERTREQ N(MOBIKE_SUP) CP(ADDR DNS NBNS SRV ADDR6 DNS6 SRV6) SA TSi TSr ]
> Oct 28 13:31:07 vpn charon: 10[IKE] received 32 cert requests for an
> unknown ca
> Oct 28 13:31:07 vpn charon: 10[CFG] looking for peer configs matching
> server.ip.address[%any]...client.ip.address[client.nat.ip.address]
> Oct 28 13:31:07 vpn charon: 10[CFG] selected peer config 'L2TP-PSK-NAT'
> Oct 28 13:31:07 vpn charon: 10[IKE] peer requested EAP, config inacceptable
> Oct 28 13:31:07 vpn charon: 10[CFG] switching to peer config 'IPSec-IKEv2'
> Oct 28 13:31:07 vpn charon: 10[IKE] EAP-Identity request configured, but
> not supported
> Oct 28 13:31:07 vpn charon: 10[CFG] sending RADIUS Access-Request to
> server 'vpnserver'
> Oct 28 13:31:07 vpn charon: 10[CFG] received RADIUS Access-Challenge
> from server 'vpnserver'
> Oct 28 13:31:07 vpn charon: 10[IKE] initiating EAP_RADIUS method (id 0x01)
> Oct 28 13:31:07 vpn charon: 10[IKE] peer supports MOBIKE
> Oct 28 13:31:07 vpn charon: 10[IKE] authentication of 'C=CH, O=VPN,
> CN=server.ip.address' (myself) with RSA signature successful
> Oct 28 13:31:07 vpn charon: 10[IKE] sending end entity cert "C=CH,
> O=VPN, CN=server.ip.address"
> Oct 28 13:31:07 vpn charon: 10[ENC] generating IKE_AUTH response 1 [ IDr
> CERT AUTH EAP/REQ/MD5 ]
> Oct 28 13:31:07 vpn charon: 10[NET] sending packet: from
> server.ip.address[4500] to client.ip.address[4500]
> Oct 28 13:31:36 vpn charon: 13[JOB] deleting half open IKE_SA after timeout
>
> /var/log/auth.log:
> Oct 28 13:31:06 japanvpn charon: 08[IKE] client.ip.address is initiating
> an IKE_SA
>
> /etc/ipsec.conf:
> conn IPSec-IKEv2
> keyexchange=ikev2
> auto=add
> left=server.ip.address
> leftsubnet=0.0.0.0/0
> leftauth=pubkey
> leftcert=serverCert.pem
> right=%any
> rightsourceip=192.168.104.0/0
> rightauth=eap-radius
> rightsendcert=never
> eap_identity=%any
>
> /etc/strongswan.conf:
> eap-radius {
> servers {
> vpnserver {
> secret = somesecret
> address = 127.0.0.1
> }
> }
> }
>
> By setting FreeRADIUS to debug mode I found that the user name
> Strongswan passed to FreeRADIUS was incorrect (some gibberish), so I
> guess it's a secret code problem but I'm 100% sure the secret code is
> correct. Also I've tried changing it to some other string like 123456
> but Strongswan passes the username as the same gibberish as before, thus
> I don't think it's a secret code problem.
>
> Any suggestions/advices would be appreciated.

======================================================================
Andreas Steffen                         andreas.steffen at strongswan.org
strongSwan - the Linux VPN Solution!                www.strongswan.org
Institute for Internet Technologies and Applications
University of Applied Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===========================================================[ITA-HSR]==