[strongSwan] Tunnel seems to be established, but traffic does not flow through it.

Meera Sudhakar mira.sudhakar at gmail.com
Fri Oct 14 12:46:52 CEST 2011


Thanks a lot Martin. It now works.

Regards,
Meera

On Fri, Oct 14, 2011 at 1:19 PM, Martin Willi <martin at strongswan.org> wrote:

> Hi,
>
> >       left=169.254.3.75
> >       leftsubnet=169.254.3.0/32
> >       right=169.254.4.75
> >       rightsubnet=169.254.4.0/32
>
> > root at localhost:/root> ping 169.254.4.75
>
> Your configuration looks wrong. You are sending traffic between your
> hosts 169.254.4.75 and 169.254.3.75, but the tunnel you set up is
> between the addresses 169.254.3.0/32 and 169.254.4.0/32.
>
> If you need a host-to-host tunnel, remove the leftsubnet/rightsubnet
> definitions. If you want to tunnel the networks attached to your hosts,
> correct your left/rightsubnet options (/24 or something would make more
> sense, /32 does not include your hosts).
>
> Regards
> Martin
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20111014/8e407f65/attachment.html>


More information about the Users mailing list