[strongSwan] Android/Stongswan Integration

[zhen chen]

Hi Tobias, 

I successfully loaded 4.6.1 to Android 2.2. I pushed ipsec.conf to the emulator. Now if I us ipsec start, then ipsec up.
 
1. Doesn't seem that Charon loads the the  ipsec.conf file.
2. If I use ipsec up to force the starter to bring up the conn, ipsec up gave some error like " unnamed error ] ] ]". 


What should I do so the starter would use the ipsec.conf file like I normally do? 

Thanks!
-zhen   



________________________________
 From: Tobias Brunner <tobias at strongswan.org>
To: zhen chen <zchen2711 at yahoo.com> 
Cc: "users at lists.strongswan.org" <users at lists.strongswan.org> 
Sent: Tuesday, November 22, 2011 1:20 AM
Subject: Re: [strongSwan] Android/Stongswan Integration
 
Hi Zhen,

> If I used 4.6.1, is there any special configuration I need to enable to
> build the starter and stroke when I build the Android?

Have a look at the top Android.mk.  There you can uncomment the
strongswan_BUILD_STARTER line to enable the build of starter and stroke.

> I assume I wouldn't need to apply any of the three frontend patches any
> more? 

No, you don't.  But you still could, as the two config methods are not
mutually exclusive.

Regards,
Tobias
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20111122/e2775362/attachment.html>