[strongSwan] strongswan <=> openswan

[Gary Smith]

> -----Original Message-----
> From: users-bounces+gary.smith=holdstead.com at lists.strongswan.org
> [mailto:users-bounces+gary.smith=holdstead.com at lists.strongswan.org] On Behalf
> Of Gary Smith
> Sent: Tuesday, March 01, 2011 9:24 PM
> To: 'strongSwan user list'
> Subject: Re: [strongSwan] strongswan <=> openswan
> 
> > strongSwan is configured for the IKEv2 protocol but
> > the error message
> >
> > > initial Main Mode message received on strongswanip:500 but no
> > connection has been authorized with policy=PUBKEY
> >
> > was issued by strongSwan's IKEv1 pluto daemon. This means that
> > the Openswan end initiates the connection using the old IKEv1
> > protocol. Please configure Openswan to use IKEv2.
> >
> > Regards
> >
> > Andreas
> 
> Andreas,
> 
> Any advice on how to enable ikev2 on openswan? I seem to find the openswan.org
> site very lacking on any real examples on some of this.
> 
> Gary Smith


I've opted to go with Yaron's centos package and was able to get strongSwan on centos in 10 minutes. Everything is good now.