[strongSwan] Test framework not showing iptables rules in tables other than 'filter'

[Andreas Steffen]

Hello Daniel,

usually the console.log shows the setup of the additional
iptables rules:

http://www.strongswan.org/uml/testresults45/ikev2/nat-two-rw-mark/console.log

iptables-save shows all the rules but unfortunately without
the packet statistics

Regards

Andreas

On 06/15/2011 06:57 AM, Daniel Mentz wrote:
> I'm looking at the config example at
>
> http://www.strongswan.org/uml/testresults45/ikev2/nat-two-rw-mark/index.html
>
> and I'm wondering where I can find a complete list of all iptables rules
> that are in effect.
>
> "iptables -L" only displays the rules in the filter table. The rules
> from the nat and mangle tables are missing.
>
> Wouldn't it make more sense to use "iptables-save" to dump the complete
> picture. AFAICT, it outputs the nat and mangle table as well as the
> filter table.
>
> Thanks
> -Daniel

======================================================================
Andreas Steffen                         andreas.steffen at strongswan.org
strongSwan - the Linux VPN Solution!                www.strongswan.org
Institute for Internet Technologies and Applications
University of Applied Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===========================================================[ITA-HSR]==