[strongSwan] MOBIKE

[Patricia de Noriega]

How I can bind that interface by means of the ipsec.conf file?

Best regards,

On 29 July 2011 16:51, Andreas Steffen <andreas.steffen at strongswan.org>wrote:

> Would it help to bind the virtual IP do a dummy interface, so that
> when the physical interface goes away the source route still
> exists and remains covered by the traffic selectors and thus by
> the transient DROP policy for the TS.
>
> Regards
>
> Andreas
>
> On 07/29/2011 04:12 PM, Tobias Brunner wrote:
> > Hi Patricia,
> >
> >> I've test also with virtual IP's and I obtain the same behaviour :(
> >
> > Ah, yes.  The source route installed by charon only covers eth0 and its
> > default gateway.
> >
> > Andreas, Martin, any ideas?
> >
> > Regards,
> > Tobias
>
> ======================================================================
> Andreas Steffen                         andreas.steffen at strongswan.org
> strongSwan - the Linux VPN Solution!                www.strongswan.org
> Institute for Internet Technologies and Applications
> University of Applied Sciences Rapperswil
> CH-8640 Rapperswil (Switzerland)
> ===========================================================[ITA-HSR]==
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.strongswan.org/pipermail/users/attachments/20110729/76ca730e/attachment.html>