[strongSwan] VPN connection issue on changing port speed to 10 Mbps (from 1000 Mbps)

[Vinay Kalkoti]

The interfaces would be up. But, ping to those systems are failing.

The strongSwan logs doesnt have anything. ipsec status says the
connection is established.

Thanks,
Vinay

On Thu, Jul 28, 2011 at 10:55 PM, Andreas Steffen
<andreas.steffen at strongswan.org> wrote:
> Hello Vinay,
>
> I'm not aware of any known bug. Does the interface go away
> during the speed change? Does the strongSwan log show any
> warnings that the interface disappeared and reappeared?
>
> BTW - strongSwan 4.2.17 is very ancient.
>
> Regards
>
> Andreas
>
> On 28.07.2011 19:20, Vinay Kalkoti wrote:
>> Hi,
>>
>> I am facing a problem with my VPN connection. When the port speed is
>> changed from 1000 Mbps to 10 Mbps, the remote systems connected
>> through VPN are not pinging.
>>
>> But, if the VPN is restarted, then ping succeeds. I am using
>> strongswan-4.2.17-1.
>>
>> I wanted to check if this is an expected behavior or is a bug (known)
>> in strongswan.
>>
>> Thanks,
>> Vinay
>
> ======================================================================
> Andreas Steffen                         andreas.steffen at strongswan.org
> strongSwan - the Linux VPN Solution!                www.strongswan.org
> Institute for Internet Technologies and Applications
> University of Applied Sciences Rapperswil
> CH-8640 Rapperswil (Switzerland)
> ===========================================================[ITA-HSR]==
>